30/ASSEMBLING THE ENGINE
135
300067-11
–
Release the locking lever.
–
Mount and tighten screw
.
Guideline
Screw, shift drum locating
M6
10 Nm
(7.4 lbf ft)
Loctite
®
243™
19.7
Installing shift shaft
300066-11
–
Slide shift shaft
with the washer into the bearing seat.
–
Push sliding plate
away from the shift drum locating
. Insert the shift shaft all
the way.
–
Let the sliding plate engage in the shift drum locating.
–
Shift through the transmission.
19.8
Installing starter drive
300065-11
–
Install the two needle bearings
and the woodruff key
.
–
Push on the freewheel gear
.
300064-11
–
Push on the starter idler gear
with washer. Mount lock ring.
–
Push on the needle bearing and torque limiter
with washer. Mount lock ring.
19.9
Installing primary gear
300063-10
–
Ensure that the spring washer is seated properly.
–
Mount primary gear
.
Info
Turn the freewheel gear backwards and forwards to ease meshing.
Summary of Contents for 690 SMC 2008
Page 1: ...REPAIR MANUAL 2008 690 SMC EU 690 SMC AUS UK 690 SMC USA Article no 3206042en...
Page 2: ......
Page 185: ...183...
