81
6.4 Setup
6.4.1 Local Setup - Device
Please make sure the network setting of DVR has been done properly prior to the remote connection setting.
6.4.1.1
Remote Site Connection Setup
Click Setup – Local Setup – Device to enter the setup and a dialog will pop up as below picture.
6.4.1.2 New Device Register
Select “Device Connection List” on left-hand side and click [New] to register new devices.
Describe the connection information as below. User must fill in where information requested in
bold
.
-
Device Name
: Type the DVR name to be displayed in the server list pane. Please note that this name has no relation to
the ID registered in DVR. Users may create a name to be easily distinguished.
-
Description: Type brief description of the site
-
IP Address
: Input IP address or Domain Name of DVR (check from the SETUP>DEVICES>Network in DVR)
-
Command Port
: Input Administrator’s number among port numbers set in DVR (check from the
SETUP>DEVICES>Network in DVR). Default port number is
5920
-
Stream Port
: Input Video/Audio number among port numbers set in DVR (check from the SETUP>DEVICES>Network in
DVR). Default port number is
5921
-
Login ID
: Type authorized ID of the DVR. Default ID is
admin
.
-
Login Password
: Type correspond password of the ID. Default Password is
1111
-
Confirm Password
: Retype the password to confirm
-
Pop up Display:
User can setting either video pop up or beep on corresponding channel when event occurs.
Device
Summary of Contents for KM2115DKQCN
