KT&C KM2115DKQCN, User Manual

Page: 195 / 219

195
12.4 Link
12.4.1 Link Setup
 Click “Setup>Link>” then shows as below.
NOTE
The above menu is only available on the DVR model with Serial-In function.
 Click “Serial In” to appear following screen.
 Select POS/ATM port by clicking ‘Serial In’ button.
 Assign the port to display/record channel by clicking a “Link Camera”.
 Select “Link Alarm Out” item to run alarm output when the serial in events occur.
 Designate the E-Mail address or IP/Domain name at “Link Notification” box when the serial in events occur.
NOTE
E-Mail address or IP/Domain configuration is possible to set in ‘Setup>Network>Notification’ menu.
 Set other POS/ATM port as above.
 Click “OK” to save the configuration.