KT&C KM2115DKQCN, User Manual

Page: 74 / 219

74
NOTE
Please do not use jpeg format while archiving in live mode.
NOTE
Please do not change the settings by DVR or CMS, while back up.
NOTE
Please enter all the necessary information before Click ‘START’.
NOTE
If the When the targeted file size is over 2GB, press “ ” button on the right again after the first “ARCHIVE SUCCESS”. And DVR will
continue to archive to another file with the extension of “-002” Automatically added. In case of DVD media, change the media after the first file
is finished and press “ ” to continue to the rest of progress.
CAUTION
PLEASE DO NOT USE THE SPACE WHEN ENTER BACKUP FILE NAME.
CAUTION
WHILE BACKUP PROCEDURE, PLEASE DO NOT DETACH STORAGE DEVICE OR POWER OFF THE DVR. OTHERWISE, IT MAY
CAUSE PERMANENT DAMAGE TO THE DVR OR THE STORAGE DEVICE. IN SUCH CASE, USER MUST REBOOT THE DVR. IF THE
DVR DOES NOT OPERATE PROPERLY, USER MIGHT NEED TO CONTACT SERVICE CENTER.
CAUTION
WHEN ARCHIVING IN AVI FORMAT, IT ONLY SUPPORTS 1CH AND DOES NOT SUPPORT AUDIO AND PASSWORD FEATURES.
5.7 Menu Bar

Menu bar enables users to control all function as front button on the OSD screen.
 Move the mouse cursor to bottom around Date and Time indication then Menu bar will show up on the live screen.
 Each icon functions as below;
: Exit the Menu Bar
: Safely turn off the DVR
: Enter Archive mode
: Enter PTZ control mode
: Enter Setup mode
: Turn the display as 1 channel full screen. Additional click on full screen, it will change to next channel in sequence.
: Turn the display as 4 channels split screen. Additional click will change to the next four channels in sequence.
: Turn the display as 8 channels split screen. Additional click will change to the next eight channels in sequence.
: Turn the display as 16 channels split screen, There is no changes when additional click on 16 channels split screen.
: Activate the Sequence as configured on spot monitor Setup menu.
: Control Spot Monitor 1. The spot monitor will stops sequencing and follows main monitor’s display(Full screen only).
: Control Spot Monitor 2. The spot monitor will stops sequencing and follows main monitor’s display(Full screen only).
: Control Spot Monitor 3. The spot monitor will stops sequencing and follows main monitor’s display(Full screen only).
: Select the multi spot split mode by clicking MS and 1/4/9/16 buttons.
: Play Instant Playback
: Enter Calendar Search