KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 114 / 278

Measure the jump value at the edge of front brake disc
Available limit 0.15mm
5.5 CBS
5.5.1 Replacement of brake hose and brake line
Notes
Brake fluid may quickly corrode the surface of
painted part, so if the brake fluid spills on any
plastic part, it must be thoroughly rinsed
immediately.
●Remove the hollow bolt of brake hose [A].
●When removing brake hose, be careful not to spill
brake fluid on any painted part.
●When removing brake hose [B], temporarily fix the
end of brake hose in a high place to minimize the loss
of brake fluid.
●If brake fluid overflows, clean it immediately.
- 113 -
KS MOTORCYCLES - https://ksmotorcycles.com