KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 87 / 278

2.3 Trigger
2.3.1 Disassembly of trigger
●Trigger [A] cannot be disassembled separately,
because it is integrated with alternator (see
“Disassembly of Alternator” for details)
●Use the tester
*Note
The trigger can be checked on the engine.
2.3.2 Inspection
● Remove trigger wire connector.
● Measure the impedance values of blue / white and
green / white outgoing lines of engine.
Standard value: 150±10Ω (20°C)
★
If the measured resistance value is higher than the
specified value, the coil circuit is disconnected and
needs to be replaced.
★
If the resistance value is lower than the specified
value, the coil is short-circuited and must be replaced.
2.4 Ignition Coil
2.4.1 Disassembly of ignition coil:
●Remove the fuel tank (see Chapter IX “Disassembly of
Fuel Tank” for details).
Trigger plug
Gray
Blue /
white
Green /
white
White
White
White
- 86 -
Gray
Gray
White
White
White
Blue /
white
white
/Green
KS MOTORCYCLES - https://ksmotorcycles.com