KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 59 / 278

It should be conducted in the reverse order of
disassembly.
Warning!
To prevent short circuit, first connect the positive
electrode and then the negative electrode.
Do not disengage the battery during the commissioning
of motorcycle; otherwise, the internal components may
be damaged.
Inspection of charging state (closed-circuit voltage)
Open the seat mat and remove the right protector.
Remove the battery from the battery box.
Remove the negative lead and then the positive lead.
Take out the battery.
Measure the voltage between battery terminals.
Fully charged: 13.1V
Undercharge: 12.3V (the battery has not worked for 1
hour)
*Note
Inspection under the charged state must be conducted
using a voltmeter.
Charging
Connection method: The positive electrode of
charger is connected to the
positive electrode of battery.
The negative electrode of
charger is connected to the
negative electrode of battery.
Warning!
• Never use a source of ignition near batteries.
• First turn off the charger switch before starting
charging or after completing charging.
to prevent sparks at the connection position and avoid
the danger of explosion.
•In the process of charging, conduct the standard
operation according to the current time marked on the
battery.
*Note
•Battery cannot be used generally during the quick
charging of battery, except in emergencies.
•Measure the voltage 30 minutes after charging.
Charging current: Standard: 0.6A
Quick: 6.0A
Charging time: Standard: 10-15 hours
Quick: 30 minutes
Completion of charging: open circuit voltage: 12.8V
or more
Voltmeter
- 58 -
KS MOTORCYCLES - https://ksmotorcycles.com