KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 32 / 278

Diagnostic procedure for trip stop fault of transmission
Yes No
Yes No
No Yes
Trip stop of
transmission
Check whether the positioning wheel spring is
broken or its elastic force is insufficient
With
Replacement
Decompose the crankcase, and check whether the engaging-in
depths of gears at various positions meet the requirements
The engaging-in depth
of gear is sufficient
The engaging-in depth
of gear is insufficient
Check whether the meshing end of cam claw at the end face of meshing
gear is worn into tapered shape or a large roundness, and the groove at the
corresponding gear end surface is worn into a flared opening
Check whether the shift fork is
excessively worn or deformed
Replace the
gear
Check whether the spline tooth of
primary and auxiliary shafts and the
spline slot of sliding gear are
excessively worn
Replace the
shift fork
1. Check whether the shift fork is excessively
worn or deformed
2. Check whether the fit clearance between fork
pin and cam slot of shift shift gear shaft is too
large
3. Check whether the transmission is installed
properly
- 31 -
KS MOTORCYCLES - https://ksmotorcycles.com