KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 10 / 278

Loose cable is a potential safety hazard of electrical
safety. Check the next cable after clamping the cable, to
ensure electrical safety;
Wire clamps are not allowed to bend in the direction of
the solder joint;
Bundle the cable at the designated location;
Cables are not allowed to be placed at the end of frame
or at the corners;
Cables are not allowed to be placed at the ends of bolts
or screws;
Keep cables away from heat source or the position
where the cable may be caught during movement;
Cables should not be kept too tight or loose when being
placed along the faucet handle, and must not interfere
with adjacent parts in any steering position;
Cables should be smoothly placed and must not be
twisted or knotted;
Before connectors are mated, check whether the
connector sheath is damaged and the connector is
opened excessively;
If the cable is at a sharp or corner, please protect it with
tape or a hose;
After the cable is repaired, please bind it up reliably
with tape;
The control wire must not bend or twist. If the control
line is damaged, inflexible operation may be caused;
- 9 -
KS MOTORCYCLES - https://ksmotorcycles.com