KS Motorcycles K-LIGHT125, Maintenance Manual

Page: 135 / 278

VII. Front Wheel/Front Suspension
Preparatory Information ·················· 7.1
Fault Diagnosis····························· 7.2
Front Wheel ································ 7.3
Handlebar ··································· 7.4
Front Fork ·································· 7.5
Front Shock Absorber ····················· 7.6
7.1 Preparatory Information
Operation Precautions
Before the front wheel is disassembled, support the
bottom of the motorcycle with jacks and do not reverse
the front wheel when it floats above the ground.
There should be no grease attached to the friction pad,
friction pad assembly or fluid brake disc during
operation.
Technical parameters
Measuring position Item
Standard
value (mm)
Allowable limit (mm)
Front wheel axle Bending degree 0.2
Front wheel
Rim
shimmy
Vertical direction 2.0
Horizontal direction Within 1.0 2.0
Torque value Tools
Front axle locknut 75
∼
88 N·m Bearing removal rod
Front caliper mounting bolt 22
∼
29 N·m Locknut wrench
Rear view mirror mounting bolt 22
∼
29 N·m Torque wrench
Meter mounting seat mounting bolt 10
∼
12 N·m
Clamp bolt of upper bracket
37
∼
44 N·m
Upper grip positioner mounting bolt 22
∼
29 N·m
Handlebar positioning double-end
stud locknut
45
∼
50 N·m
Steering column bearing locknut 70 N·m
Steering column bearing nut 2 N·m
Upper clamp bolt of shock absorber 22
∼
29 N·m
Lower clamp bolt of shock absorber
45
∼
50 N·m
Headlight bracket locknut
37
∼
44 N·m
- 134 -
KS MOTORCYCLES - https://ksmotorcycles.com