Krone BiG Pack 870 HDP XC, Original Operating Instructions

Page: 24 / 410

2 Safety
2.3 Basic safety instructions
24
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
2.3.19 Dangers in connection with certain activities: Working on the machine
Only perform work when the machine is at standstill
If the machine is not shut down and safeguarded, parts may move unintentionally or the
machine may start moving. Thus there is a risk of serious injuries or death.
„
Before carrying out any repair, maintenance and cleaning work on the machine, shutdown
and safeguard it,
refer to page 25 .
Maintenance and repair work
Improper maintenance and repair work endanger operational safety. Thus there is a risk of
accidents, serious injuries or death.
„ Only perform work which is described in this operating instructions. Prior to any work, stop
and safeguard the machine,
refer to page 25 .
„ All other maintenance and repair work must only be performed by qualified specialist
workshop.
Raised machine and machine parts
The raised machine or machine parts may drop or tilt unintentionally. Thus there is a risk of
serious injuries or death.
„
Do not stay under the raised machine or machine parts which have not been securely
supported,
refer to page 26 .
„
Prior to all work on raised machines or machine parts, lower the machine or machine parts.
„
Before performing any work on or under the raised machine or machine parts, secure the
machine or machine parts with rigid safety support or with hydraulic shut-off device or by
supporting against lowering.
Danger associated with welding work
Improper welding work endangers the operational safety of the machine. Thus there is a risk of
accidents, serious injuries or death.
„
Never perform welding work on the following parts:
• Gearboxes
• Parts of hydraulics
• Parts of electronics
• Frame or supporting component groups
„ Before carrying out welding work on the machine, obtain approval by KRONE customer
service and let you show alternatives, if necessary.
„
Welding work must only be performed by experienced qualified personnel.
„ Attach the earthing of the welding device near the welding points.
„
Caution when performing welding work near electric and hydraulic parts, plastic parts and
pressure accumulators. The parts may be damaged, endanger people or cause accidents.
2.3.20 Dangers in connection with certain activities: working on wheels and
tyres
Incorrect assembly or disassembly of wheels and tyres endangers operational safety. As a
result, accidents may be caused and people may be seriously injured or killed.