manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Original Operating Instructions

Share
Download
Krone BiG Pack 870 HDP XC Original Operating Instructions Download Page 119

KRONE ISOBUS Terminal

10

Touchable display

10.2

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

119

Releasing ISOBUS Shortcut Button

1

EQ000-071

„

Turn the ISOBUS Shortcut Button (1) in the clockwise direction.

ð

The display shows the message above.

„

Press the 

 key.

ð

Alternatively, you can press 

 or the adjacent key.

Æ

All functions of the machine are available again.

10.2

Touchable display

1

2

EQC000-002

The terminal is equipped with a touch sensitive display (2) for menu guidance and to enter
values/data. Functions can be called up and values in blue lettering can be changed by
touching the display.

INFORMATION

To execute functions, either use scroll wheel (1) or touch screen.

Summary of Contents for BiG Pack 870 HDP XC



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands