Krone BiG Pack 870 HDP XC, Original Operating Instructions

Page: 193 / 410

Settings 15
Setting the working height of the pick-up 15.1
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 193
15 Settings
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
„
To avoid accidents, the relevant safety instructions must be read and observed, refer to
page 14 .
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„ The safety routines must be read and observed to avoid accidents, refer to page 25 .
15.1 Setting the working height of the pick-up
BPG000-035
ü
The pick-up is raised into transport position, refer to page 100 .
„ Shut down and safeguard the machine, refer to page 25 .
WARNING! Risk of injury due to unintentional movement of the pick-up. If the pick-up is
not secured by the stop cock, the pick-up may move unintentionally. Thus, persons could be
seriously injured.
„
In order to secure the pick-up against unintentionally lowering, refer to page 100 .
„
Pull the spring cotter pin (2), move the guide wheel (3) via perforated bar (1) into the desired
position and secure it with the spring cotter pin (2).
„
Check if the guide wheels on both sides of the pick-up are in the same position on the
perforated bar (1).
„ In order to prevent damages at the guide wheels and an increased wear to the pivot point of
the pick-up, limit the lowering of the pick-up by means of the depth limiters,
refer to
page 194 .