Krone BiG Pack 870 HDP XC Original Operating Instructions Download Page 125

Page: 125 / 410

Terminal – machine functions [Medium 1.0/Comfort 1.0]

Keys

12.2

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

125

Icon

Designation

Explanation

Error message present

refer to page 184

Packer is conveying

• The packer fills the bale channel with

crops.

• If the icon is displayed continuously, the

packer is being optimally utilised.

• If the icon does not have a black

background during the baling process,
check the “packer feed" sensor.

Packer is collecting

• The packer collects crops and fills only

the feed channel.

• Low packer utilisation.
• Increase the driving speed until the icon

is continuously displayed.

Silage additives unit
switched off

Silage additives unit
switched on

Baling flaps opened

The symbol flashes.

Baling flaps closed

Blades are active

Cutting in progress.

Blades are not active

No cutting in progress.

12.2

Keys

Page 1/2 = keys for "Maintenance"

Page 2/2 = keys for "Work"

AUTO

EQG000-027

The available icons comply with the equipment of the machine. The following represented icons
are not always available.

Summary of Contents for BiG Pack 870 HDP XC



























































































































































































































































































































































































































Search results

Summary of Contents for BiG Pack 870 HDP XC

Reviews:

Brands by name

Popular brands

Krone BiG Pack 870 HDP XC, Original Operating Instructions

Search results

Summary of Contents for BiG Pack 870 HDP XC

Reviews:

Brands by name

Popular brands