manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

221

Appendices

The following functions can be assigned to the REALTIME 
CONTROLS [1]–[4] knobs in B-mode.

• For program, combination, or song, make these settings 

in 2.2: Ed-Ctrl/Controller page “Knob B Assign” (2.2–
1a).

• In Sampling mode (when the EXB-SMPL option is 

installed), assign the functions in the 5.2: Controller/
Controls page setting “Knob B Assign” (5.2–1a).

This can be set for each program in Program mode, 
each combination in Combination mode, and each song 
in Sequencer mode. For Sampling mode, the settings 
apply to the entire mode.

Realtime Control Knobs B Assign List

Knob 1...4 B Assign

Off

No function

Knob Mod. 1 (CC#17)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobM1#17 for “AMS,” or Kb1#17 for “Dmod Src.” Simultaneously, CC#17 will be transmitted.

Knob Mod. 2 (CC#19)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobM2#19 for “AMS,” or Kb2#19 for “Dmod Src.” Simultaneously, CC#19 will be transmitted.

Knob Mod. 3 (CC#20)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobM3#20 for “AMS,” or Kb3#20 for “Dmod Src.” Simultaneously, CC#20 will be transmitted.

Knob Mod. 4 (CC#21)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobM4#21 for “AMS,” or Kb4#21 for “Dmod Src.” Simultaneously, CC#21 will be transmitted.

Master Volume

Control the volume. Simultaneously, the universal system exclusive message Master Volume [F0H, 7FH, nn, 04, 
01, vv, mm, F7H] will be transmitted to adjust the volume of all tracks or timbres (while preserving the volume bal-
ance between tracks or timbres).

Porta. Time (CC#05)

Control the portamento time. Simultaneously, CC#5 will be transmitted.

Volume (CC#07)

Control the volume. Simultaneously, CC#7 will be transmitted.

IFX Pan (CC#08)

Control the panning after the insertion effect. Simultaneously, CC#8 will be transmitted.

Pan (CC#10)

Control the oscillator panning. Simultaneously, CC#10 will be transmitted.

Expression (CC#11)

Control the expression. Simultaneously, CC#11 will be transmitted.

FX Ctrl 1 (CC#12)

Control Effect Dynamic Modulation. When controlling this, set “Dmod Src” to FX1#12. Simultaneously, CC#12 will 
be transmitted.

FX Ctrl 2 (CC#13)

Control Effect Dynamic Modulation. When controlling this, set “Dmod Src” to FX2#13. Simultaneously, CC#13 will 
be transmitted.

Flt Cutoff (CC#74)

Control the cutoff frequency of the Filter (low pass filter). Simultaneously, CC#74 will be transmitted.

Flt Reso. (CC#71)

Control the resonance of the Filter, or the cutoff frequency of the high pass filter. If the program’s “Type (Filter1/2 
Type)” is Low Pass Resonance, the resonance level will be controlled. If it is Low Pass & High Pass, the cutoff 
frequency of the high pass filter will be controlled. Simultaneously, CC#71 will be transmitted.

Flt EG Int. (CC#79)

Control the EG intensity of the Filter. Simultaneously, CC#79 will be transmitted.

F/A Attack (CC#73)

Control the EG attack of the Filter and Amplifier. Simultaneously, CC#73 will be transmitted.

F/A Decay (CC#75)

Control the EG decay time and slope time of the Filter and Amplifier. Simultaneously, CC#75 will be transmitted.

F/A Sus. (CC#70)

Control the EG sustain level of the Filter and Amplifier. Simultaneously, CC#70 will be transmitted.

F/A Rel. (CC#72)

Control the EG release time of the Filter and Amplifier. Simultaneously, CC#72 will be transmitted.

P LFO1 Spd (CC#76)

Control the frequency of LFO1. Simultaneously, CC#76 will be transmitted.

P LFO1 Dep (CC#77)

Control the LFO1 intensity of the pitch. Simultaneously, CC#77 will be transmitted. 

P LFO1 Dly (CC#78)

Control the delay of LFO1. Simultaneously, CC#78 will be transmitted.

SW 1 Mod. (CC#80)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to SW 1 #80. Simultaneously, CC#80 will be transmitted.

SW 2 Mod. (CC#81)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to SW 2 #81. Simultaneously, CC#81 will be transmitted.

Foot SW (CC#82)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select FootSW#82 for “AMS,” or FSW#82 for “Dmod Src.” Simultaneously, CC#82 will be transmitted.

MIDI CC#83 (CC#83)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select MIDI CC#83 for “AMS,” or CC#83 for “Dmod Src.” Simultaneously, CC#83 will be transmitted.

MFX Send 1 (CC#93)

Control the send level to Master Effect1. Simultaneously, CC#93 will be transmitted.

MFX Send 2 (CC#91)

Control the send level to Master Effect2. Simultaneously, CC#91 will be transmitted.

MIDI CC#00...CC#95

The specified MIDI control change (CC#) will be transmitted. If this instrument is set so as to be controlled by the 
control change message, the corresponding control will occur.

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

GE Mentor Visual iQ Quick Start Manual preview
Mentor Visual iQ
Brand: GE Pages: 2
Badger Meter Blancett B3100 Series User Manual preview
Blancett B3100 Series
Brand: Badger Meter Pages: 16
Badger Meter ModMAG M1000 User Manual preview
ModMAG M1000
Brand: Badger Meter Pages: 26
Badger Meter ModMAG M2000 Installation And Operation Manual preview
ModMAG M2000
Brand: Badger Meter Pages: 48
F&F LE-03 Quick Start Manual preview
LE-03
Brand: F&F Pages: 2
Landis+Gyr ULTRAHEAT T230 Manual preview
ULTRAHEAT T230
Brand: Landis+Gyr Pages: 26
Landis+Gyr Ultracold T550 Operating Instructions preview
Ultracold T550
Brand: Landis+Gyr Pages: 3
Yamaha PSR-S670 Reference Manual preview
PSR-S670
Brand: Yamaha Pages: 98
Magnescale SR85 Supplement Manual preview
SR85
Brand: Magnescale Pages: 8
Shimpo DT209X Instruction Manual preview
DT209X
Brand: Shimpo Pages: 68
Keller LEO2-Ei Manual preview
LEO2-Ei
Brand: Keller Pages: 8
Hanna Instruments HI 9147 Instruction Manual preview
HI 9147
Brand: Hanna Instruments Pages: 2
Zero 88 DMX DeBug Manual preview
DMX DeBug
Brand: Zero 88 Pages: 32
MRC PVB-820 Operation Manual preview
PVB-820
Brand: MRC Pages: 14
Tonghui TH2689 Operation Manual preview
TH2689
Brand: Tonghui Pages: 65
AquaMaster Combo meter P700 Pro User Manual preview
Combo meter P700 Pro
Brand: AquaMaster Pages: 20
Anslut 006251 Operating Instructions Manual preview
006251
Brand: Anslut Pages: 11
Silverline 842338 Manual preview
842338
Brand: Silverline Pages: 2

Brands by name

Popular brands

Load more brands