manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

160

2. Routing

Two master effects (MFX 1 and 2) can be used in any mode 
other than Sampling (if the separately sold EXB-SMPL 
option is installed). If you are not using the Insert Effect in 
any mode, the Master Effects send levels are determined by 
the “Send Level 1/2 (MFX2)” parameters specified indepen-
dently for the oscillators (Program), timbres (Combination), 
tracks (Sequencer). For example, you can apply substantial 
reverberation to a piano sound assigned to the timbre and 
tracks, a small amount of reverberation to the strings sound, 
and no reverberation to the bass sound. If you are using the 
Insert Effect, set the “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” parameters for the post-IFX signals.

2–1. Program mode

The PROG 7.1–1a MFX Send parameters “Send 1” and 
“Send 2” or the PROG 7.1–2a “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” parameters that follow IFX determine the 
send levels to the master effects.
The PROG 7.1–1a MFX Send “Send 1” and “Send 2” settings 
are used when “BUS Select” is set to L/R or Off. Each can be 
set for oscillator 1 and 2.
The PROG 7.1–2a “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” settings that follow IFX are used when 
“BUS Select” is set to IFX. If the insert effect are chained 
(connected in series), the “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” that follows the last-connected IFX will be 
used.
If “BUS Select” is 1, 2 or 1/2, the oscillator will be directly 
output to AUDIO OUTPUT (INDIVIDUAL)1, 2 (

☞

p.162 

“Individual Outputs”). Send levels 1/2 will be ignored, and 
the master effects will not be applied.

Send Level 1 can be controlled by MIDI Control Change 
CC#93 and Send Level 2 can be controlled by MIDI 
Control Change CC#91 on global MIDI channel “MIDI 
Channel” (GLOBAL 2.1–1a). At this time, the actual 
send level uses the value of the Send 1 and 2 settings for 
Oscillators 1 and 2, multiplied by the Send Level 1 and 
2 values received via MIDI.

– Setting for drum program –

If the program “Oscillator Mode” (PROG 2.1–1a) is Drums, 
the “USE DKit Setting” (PROG 7.1–1b) will be used.
If this is checked, the setting for each key of the selected 
drum kit will be used. The drum instrument for a key whose 
drum kit “BUS (Bus Select)” (GLOBAL 5.1–3a) parameter is 
set to L/R or Off will use the “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” (GLOBAL 5.1–3a) settings. If IFX is used, 
the “S1 (Send1(MFX1))” and “S2 (Send2(MFX2))” (PROG 
7.1–2a) after passing through IFX will be used.
If this is not checked, the “Send 1” and “Send 2” (PROG 7.1–
1a, MFX Send) settings or the “S1 (Send1(MFX1))” and “S2 
(Send2(MFX2))” (PROG 7.1–2a) settings after passing 
through IFX will be used for all drum instruments. (This is 
the same as when “Oscillator Mode” is Single or Double.)

2–2. Combination, Sequencer mode

Use “S1 (Send1(MFX1))” and “S2 (Send2(MFX2))” (7.1–
1(2)a) for timbres (Combination) and tracks (Sequencer) to 
set the Send level for each timbre and track. As with Pro-
gram mode, if “BUS Select” is set to L/R or Off, “S1 
(Send1(MFX1))” and “S2 (Send2(MFX2))” become effective. 
In this case, the actual send level will be the setting of the 
program (PROG 7.1–1a) used by the timbre/track multi-
plied by the send level you specify here.

– Send level –

For example, if a Program’s “OSC1 Send1” is set to 127, 
“Send2” set to 064, “OSC2 Send1” set to 064, “Send2” set to 
127

, a Combination’s “Send1” set to 064, and “Send2” set to 

127

, the actual send levels of the combination are calculated 

as follows:

OSC1 Send1=127 (100%)*064(50%)=064(50%)
OSC1 Send2=064 (50%)*127(100%)=064(50%)
OSC2 Send1=064 (50%)*064(50%)=032(25%)
OSC2 Send2=127 (100%)*127(100%)=127(100%)

If IFX is selected for “BUS Select”, use the “S1 
(Send1(MFX1))” and “S2 (Send2(MFX2))” parameters for the 
post-IFX signals.
If 1, 2 or 1/2 is selected instead, these settings are ignored 
and the Master Effect is not applied.

Send Level 1 responds to MIDI Control Change CC#93, 
and Send2 Level responds to MIDI Control Change 
CC#91. If “Send1(MFX1)” and “Send2(MFX2)” for each 
timbre/track are effective, the parameter will be con-
trolled on the MIDI channels set for the corresponding 
timbres and tracks. If the “Send1(MFX1)” and 
“Send2(MFX2)” parameters for the post-IFX signals are 
effective, they can be controlled on the MIDI channels 
assigned to IFX.

The following screens are examples in Combination mode. 
The “BUS Select” setting in screen shot (1) sends timbre 1 to 
IFX

, and the remaining timbres to L/R. In this case, the send 

levels from timbre 1 to the master effects are set by “S1 
(Send1(MFX1))” and “S2 (Send2(MFX2))” after the signal 
has passed through IFX: 01:St. Amp Simulation as shown in 
screen shot (2). (In this example, these are set to 032 and 127 
respectively.) Other timbres will use the “S1 (Send1(MFX1))” 
and “S2 (Send2(MFX2))” settings shown in screen shot (1). 
(At this time, the send level will be the send level of the pro-
gram oscillator multiplied by this send level.)

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Yamaha AW4416 Manual Supplement preview
AW4416
Brand: Yamaha Pages: 48
YSI Professional Plus Calibration Tips preview
Professional Plus
Brand: YSI Pages: 28
ICS Schneider Messtechnik Snap 41 Instruction Manual And Safety Information preview
Snap 41
Brand: ICS Schneider Messtechnik Pages: 40
MRC PVB-820 Operation Manual preview
PVB-820
Brand: MRC Pages: 14
Tonghui TH2689 Operation Manual preview
TH2689
Brand: Tonghui Pages: 65
Westinghouse D48-F, D4B-2F, D4B-3F, D4B-7F, D48-SF Instructions Manual preview
D48-F, D4B-2F, D4B-3F, D4B-7F, D48-SF
Brand: Westinghouse Pages: 8
Westfalia 836591 Instruction preview
836591
Brand: Westfalia Pages: 2
EXFO Optical Power Expert User Manual preview
Optical Power Expert
Brand: EXFO Pages: 93
NI PXIe-4141 Calibration Procedure preview
PXIe-4141
Brand: NI Pages: 20
SIGRIST DualScat Ex Instruction Manual preview
DualScat Ex
Brand: SIGRIST Pages: 58
QEED QC-POWER-T-485 User Manual preview
QC-POWER-T-485
Brand: QEED Pages: 48
Ritchie Yellow Jacket ManTooth Series User Manual preview
Yellow Jacket ManTooth Series
Brand: Ritchie Pages: 16
LaserLiner VarioView Camera Manual preview
VarioView Camera
Brand: LaserLiner Pages: 64
Vernier Go Direct GDX-NH4 User Manual preview
Go Direct GDX-NH4
Brand: Vernier Pages: 6
YATO YT-7294 Manual preview
YT-7294
Brand: YATO Pages: 44
Ocean Optics NeoFox Installation And Operation Manual preview
NeoFox
Brand: Ocean Optics Pages: 68
Waytronic WT-XS2 Manual preview
WT-XS2
Brand: Waytronic Pages: 8
Mayr ROBA 058.600.2 Installation And Operational Instructions preview
ROBA 058.600.2
Brand: Mayr Pages: 10

Brands by name

Popular brands

Load more brands