manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

113

SMPL

1.1

2.1

3.1

4.1

5.1

5.2

7.1

0

Save the sample that you created. Press the [F6] (“Save”) 
key, and the Save dialog box will appear.

In “Save to No.,” specify the save destination sample 
number. By default, an unused sample number will be 
selected. If “Overwrite” is checked, this cannot be 
selected.
If you wish to delete the original sample data and over-
write it with the edited sample data, check “Overwrite”. 
Normally, you will leave “Save to No.” at its default set-
ting, and execute without checking “Overwrite.” (

☞

p.99 

“

*1

: About “Overwrite””)

 In the case of a stereo sample, the dialog box will 

indicate “To Sample No. (L)” and “To Sample No. (R).” 
Specify the save destination sample for the L channel and 
R channel.

To execute the Save operation, press the [F8] (“OK”) key. 
To cancel without saving press the [F7] (“Cancel”) key.

A

By repeating steps 

9

–

0

 you can create more samples as 

desired.

B

Press the [F7] (“Exit”) key to exit the Time Stretch opera-
tion.
The index will specify the last-saved sample number.

If you wish to use the saved sample in Program mode 
or Sequencer mode, you must either execute “Conv. To 
Prog” (

☞

p.97, 1.1–3f), or use Program mode “Multi-

sample” (

☞

PROG 2.1–2b, 2.1–3) to select the multisam-

ple and create a program.

Be aware that the created sample will be lost if you exit 
Time Stretch without saving the sample in the Save dia-
log box.

Time Stretch requires vacant samples, multisamples, 
and relative parameters in order to execute. Before you 
execute, make sure that there is sufficient free space. If 
there is not, an error will occur.

To use Time Stretch (Slice)

1

Use “SMPL” (3.1–1b) to select the sample that you wish 
to time stretch as Slice.

2

From the Edit2 page “UTILITY,” choose “Time Stretch” 
to open the following dialog box.

3

Select “Slice” as the time stretch method.
Press the [F8] (“OK”) key to execute Time Stretch, or 
press the [F7] (“Cancel”) key to cancel without executing.

 If the L and R of a stereo sample are different in 

length, blank data will automatically be added to the end 
of the shorter sample so that it matches the longer side.

4

A dialog box for executing Time Stretch will appear.

5

Specify the number of quarter note beats and tempo of 
the currently selected sample. If you already know the 
BPM value, set “Source BPM.” If you do not know the 
BPM, setting “Beat” will cause the BPM to be calculated 
automatically. The settings here are also used as the refer-
ence values when detecting the attacks at which the sam-
ple is divided.

Beat: 

Specify the number of quarter note beats. When 

you change “Beat,” the “Source BPM” will indicate the 
BPM value for playback at the original key. This BPM 
value is automatically calculated according to the length 
from the start address to the end address (if loop is off) or 
from the loop start address to the end address (if loop is 
on). If you already know the BPM value and the calcu-
lated value is incorrect, change “Source BPM” to the cor-
rect value.
For example if you have a one-measure 120 BPM sample 
in 4/4 time, you would set “Beat” to 4. The “Source 
BPM” will be calculated automatically. If the “Source 
BPM” is not calculated as 120 due to inaccuracies in the 
start address (or loop start address) or end address, 
adjust “Source BPM” to the correct value of 120.
Source BPM: 

Specify the tempo at the original key of the 

original waveform.

“Source BPM” cannot be set or displayed outside the 
range of 40–480.

6

Set the proportional length of the sample that will be cre-
ated by Time Stretch.

• To specify the length as a ratio

Set “Ratio.” The available range is 50.00%–200.00%. If 
you specify 50.00%, the sample playack time will be 
halved. (The tempo will double.) If you specify 200.00%, 
the sample playback time will double. (The tempo will be 
halved.)
The tempo of the sample created by execution will be cal-
culated automatically from the “Ratio” and “Source 
BPM,” and displayed in “New BPM.”

• To match a desired BPM tempo value

Set “New BPM” to the desired BPM value of the sample 
that will be created. “Ratio” will automatically be calcu-
lated from the “Source BPM” and “New BPM” values.

It is not possible to set or display “New BPM” outside 
the range of 40–480. It is not possible to set or display 
“Ratio” outside the range of 50.00–200.00.

7

To execute Time Stretch, press the [F8] (“OK”) key. To 
cancel without executing, press the [F7] (“Cancel”) key. 
When you press the [F8] (“OK”) key, the attacks will be 
detected and the sample will be divided automatically, 
and time stretch will be performed.
The Time Stretch dialog box will appear.

8

Audition the results that were created by Time Stretch. 
The original sample (before being time-stretched) is 
assigned to the C2 note of the keyboard. The time-
stretched sample is assigned to C#2. Sliced (divided) 
samples will be assigned consecutively upward, starting 
from D2 on the keyboard.

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

DayTronic 4030 Instruction Manual preview
4030
Brand: DayTronic Pages: 54
Bacharach MGD-100 Quick Installation Manual preview
MGD-100
Brand: Bacharach Pages: 2
Bachmann RPT114 Owner'S Manual preview
RPT114
Brand: Bachmann Pages: 33
dallmeier SMatrix DMX2400 Commissioning preview
SMatrix DMX2400
Brand: dallmeier Pages: 12
jenway 3505 Operating Manual preview
3505
Brand: jenway Pages: 18
Ulvac SPU Instruction Manual preview
SPU
Brand: Ulvac Pages: 24
Sage SIP Operation And Instruction Manual preview
SIP
Brand: Sage Pages: 68
Jenoptik LDM51 Series Operating Manual preview
LDM51 Series
Brand: Jenoptik Pages: 54
Gates 507C Manual preview
507C
Brand: Gates Pages: 112
Bacharach SF6 Portable Monitor Specifications preview
SF6 Portable Monitor
Brand: Bacharach Pages: 2
aboni HydroTracer FLV Operation Manual preview
HydroTracer FLV
Brand: aboni Pages: 48
Sur-Gard SG-System 5 Installation Manual preview
SG-System 5
Brand: Sur-Gard Pages: 12
Tektronix P6460 Instructions Manual preview
P6460
Brand: Tektronix Pages: 20
Ntron Microx Online User Instruction Manual preview
Microx Online
Brand: Ntron Pages: 29
Zircon MultiScanner HD800 OneStep Instructions preview
MultiScanner HD800 OneStep
Brand: Zircon Pages: 2
HERON dipper-T Operating/Maintenance Instructions & Warranty preview
dipper-T
Brand: HERON Pages: 2
Orange Research 1204 Series Instruction Manual preview
1204 Series
Brand: Orange Research Pages: 2
Sub Aqua Alpha-1 Operating Instructions preview
Alpha-1
Brand: Sub Aqua Pages: 4

Brands by name

Popular brands

Load more brands