manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

124

If you turn on the power while holding down the 
[MENU] key and [EXIT] key, the “Load All (Preload 
PCG and Demo Songs)” operation will be executed 
automatically (the LCD will display a message of “Now 
Writing Internal Memory”), and all PCG data and 
demo song data will be loaded.

Change all bank references

This command changes all program banks specified for tim-
bres in combinations or tracks of songs.

1

Select “Change all bank references” to access the dialog 
box.

2

To execute this command for combinations, check 
“Combi.” To execute this command for songs, check 
“Song.” If you check “Song,” the program banks within 
the event data of the multis will also be changed.

3

Specify the banks to be changed (“Program Bank”).

4

To execute the Change All Bank References command, 
press the [F8] (“OK”) key. To cancel without executing, 
press [F7] (“Cancel”) key.

If you change two or more different banks to the same 
bank, it will not be possible to use this function to 
change them back to different banks. Be careful that the 
change destination banks do not overlap.

Half Damper Calibration

If a damper pedal that supports half damper (the separately 
sold DS–1H option) is connected to the rear panel DAMPER 
jack, here’s how you can adjust the sensitivity if the damper 
effect is not applied appropriately.

1

Connect the half damper pedal to the DAMPER jack.

2

Select “Half Damper Calibration” to access the dialog 
box.

3

Press the half damper pedal, and then release the pedal.

4

Press the F8 (“Done”) key.
If the adjustment could not be performed correctly, an 
error message will appear. Please repeat the procedure.

Since the operation of the half damper pedal is delicate, 
please use the separately sold DS–1H option. If any 
other pedal is used, the correct effect may not be 
obtained, or adjustment may not be possible.

After Touch Calibration

If the aftertouch effect depth does not function appropri-
ately, you can adjust the sensitivity. Perform the following 
adjustment if the sensitivity of the aftertouch effect is not 
correct, such as when aftertouch fails to reach the maximum 
value.

1

Select “After Touch Calibration” to access the dialog box.

2

Press down a single key for which the aftertouch effect 
depth does not correctly, and then release it.

3

Press the F8 (“Done”) key. If the adjustment could not be 
performed correctly, an error message will appear, so 
please repeat the operation.

The depth of the aftertouch effect may differ slightly 
from key to key.

1.1–2: Pref. 

(System Preference)

1.1–2a: System Preference

Bank Map

[KORG, GM]

Specifies the mapping of programs and combinations rela-
tive to Bank Select control change messages (CC#0 upper 
byte and CC#32 lower byte).
The bank select messages shown in the following table can 
be received (R) or transmitted (T), corresponding to Pro-
gram banks A...D, banks G, g(d) and Combination banks 
A...C.

Value: decimal, R: Receive, T: Transmit

Power On Mode

[Reset, Memorize]

Specifies the condition at power-on.
Reset:

 This instrument will be in Combination mode 

COMBI 1.1: Play, and Combination A000 will be selected.
Memorize:

 The location (mode and page) where you were 

when the power was last turned off, and the last-selected 
program or combination number will be selected.

The contents of any parameters that were being edited 
are not saved by this function. Before turning the power 
off, you must Write your edits, or after writing save 
them in Media mode.

Bank

Bank Map: KORG

Bank Map: GM

Bank A

00. 00 R/T

63. 00 R/T

Bank B

00. 01 R/T

63. 01 R/T

Bank C

00. 02 R/T

63. 02 R/T

Bank D

00. 03 R/T

63. 03 R/T

Bank G

121. 00, 121. 01…09 R/T

121. 00, 121. 01…09 R/T

56. 00 R

56. 00 R

00. 00, 00. 01...(XG) R
00. 00, 01. 00...(GS) R

Bank g (d)

120. 00 R/T

120. 00 R/T

62. 00 R

62. 00 R

63. 127 R (

→

Korg MUTE)

1.1–2a

1.1–2c

1.1–2b

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Bamo Pooltest 3 Instruction Manual preview
Pooltest 3
Brand: Bamo Pages: 8
Sabre Vision 3 User Instructions preview
Vision 3
Brand: Sabre Pages: 13
Topcon CA-200F Instructions For Use Manual preview
CA-200F
Brand: Topcon Pages: 62
Endress+Hauser CNGmass DCI Operating Instructions Manual preview
CNGmass DCI
Brand: Endress+Hauser Pages: 88
Keysight M3100A PXIe User Manual preview
M3100A PXIe
Brand: Keysight Pages: 92
Teledyne Lecroy Frontline 802.11 Hardware And Software Manual preview
Frontline 802.11
Brand: Teledyne Lecroy Pages: 223
Nidec FG-3000R Series Operation Manual preview
FG-3000R Series
Brand: Nidec Pages: 8
Dakota Digital VHX systems Installation And Operation Manual preview
VHX systems
Brand: Dakota Digital Pages: 34
Value WT26 Series Manual preview
WT26 Series
Brand: Value Pages: 20
Wacom SD-310E User Manual preview
SD-310E
Brand: Wacom Pages: 23
Vanguard Instruments TRM-20 User Manual preview
TRM-20
Brand: Vanguard Instruments Pages: 85
Roland HP102e Owner'S Manual preview
HP102e
Brand: Roland Pages: 224
MetLogix Mx200 User Manual preview
Mx200
Brand: MetLogix Pages: 30
GE SimpliNano Original Instructions Manual preview
SimpliNano
Brand: GE Pages: 16
Fender Telecaster Bass Owner'S Manual preview
Telecaster Bass
Brand: Fender Pages: 16
YOKOGAWA UPM101 User Manual preview
UPM101
Brand: YOKOGAWA Pages: 12
Efergy elite 2.0 Operator'S Manual preview
elite 2.0
Brand: Efergy Pages: 24
HW Group HWg-STE User Manual preview
HWg-STE
Brand: HW Group Pages: 12

Brands by name

Popular brands

Load more brands