manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

114

Index

[Source(C2), Result(C#2), 

xxx: 001...090(zzz: D2...G9)/yyy: 001...090]:

Select s the index for the sample whose waveform you 
wish to display.
If you select Source, the original waveform before time-
stretching will be selected.
If you select Result, the time-stretched sample will be 
selected.
If you set this to xxx(zzz)/yyy, an individually sliced sam-
ple will be selected. xxx is the selected index, and yyy 
indicates the total number of sliced samples. zzz indi-
cates the number of notes that are assigned to the 
selected index. A maximum of 90 samples can be 
assigned to the keyboard. If the sample was sliced into 
more than 90 samples, this will be displayed as 90.

To select an index, hold down the [ENTER] key and 
play a note on the keyboard. The index that includes 
the note you played will be selected. 

When you execute Time Stretch, the addresses will be 
specified automatically. However, playback may be 
slightly offset due to inaccuracies in the end address, 
etc. If this occurs, set “Index” to Result, and use “S 
(Start)” and “E (End)” to re-specify the addresses.

Sample waveform display

: This displays the waveform 

of the selected sample. If the “Index” is other than 
Result

, the locations at which the sample is sliced will be 

indicated by a dotted line (vertical). If “Index” is set to 
xxx(zzz)/yyy

, the sample of the selected index will be 

highlighted. If “Index” is other than xxx(zzz)/yyy, the 
Start, Loop Start, and End addresses will be indicated by 
solid lines (vertical).

 In the case of a stereo sample, you can press the 

[F3] (“L/R”) key to switch the display between the L 
channel and R channel of the sample data. (

☞

2.1–2c)

ZOOM

: When you press the [F8] (“Zoom”) button the 

zoom buttons will appear, allowing you to zoom-in or 
zoom-out vertically or horizontally on the sample wave-
form display (

☞

2.1–2d). Press the [F8] (“Zoom”) key 

once again to return to the previous display.

9

If the slice locations are not appropriate, use “Sensitivity” 
to modify the sensitivity at which the attacks are 
detected, thus changing the slice locations.

Sensitivity

[00...30]:

S (Start):

E (End):

Zero (Use Zero):

Divide:

Link:

Refer to “Time Slice” steps 

6

 and 

7

.

0

When you press the [F5] (“Strch”) key, the Time Stretch 
dialog box will appear, and you can re-do the time 
stretch. Execute Time Stretch using the same procedure 
as in step 

4

–

7

. If the sample slice locations are not 

appropriate, this will also affect the result of Time 
Stretch. For details on setting the slice locations, refer to 
“Time Slice,” steps 

6

 and 

7

. 

A

Save the sample you created. Press the [F6] (“Save”) key, 
and the Save dialog box will appear.

In “Save To No.,” specify the save destination sample 
number. By default, an unused sample number will be 
selected. If “Overwrite” is checked, this cannot be set.
If you wish to delete the original sample data and over-
write it with the edited sample data, check “Overwrite”. 
Normally, you will leave “Save to No.” at its default set-
ting, and execute without checking “Overwrite.” (

☞

p.99 

“

*1

: About “Overwrite””)

If you execute this command with “Overwrite” 
checked

, the original sample data will be deleted, and 

overwritten by the edited sample data. Thus, in the 
Time Stretch dialog box that appears after execution, 
the edited sample data will automatically have its 
attacks detected and sliced, and displayed in “Index” 
Source

.

 In the case of a stereo sample, the display will 

show “To Sample No. (L)” and “To Sample No. (R).” 
Specify the L channel and R channel save destination 
sample numbers respectively.

To execute the Save, press the [F8] (“OK”) key. To cancel 
without executing, press the [F7] (“Cancel”) key.

B

By repeating steps 

0

–

A

 you can create more time 

stretched samples as desired.

C

Press the [F7] (“Exit”) key to end the Time Stretch opera-
tion.
The last-saved sample number will be set for the index.

If you wish to use the saved sample in Program mode 
or Sequencer mode, you must either execute “Conv. To 
Prog” (

☞

p.97, 1.1–3f), or use Program mode “Multi-

sample Select” (

☞

PROG 2.1–2b, 2.1–3) to select the 

multisample and create a program.

Be aware that the created sample will be lost if you exit 
Time Stretch without saving the sample in the Save dia-
log box.

Before executing Time Stretch on a long sample, you 
should first divide the sample into measures. In some 
cases, it may not be possible to assign the sample to the 
note number or edit the slice locations.
Time Stretch requires vacant samples, multisamples, 
and relative parameters in order to execute. Before you 
execute, make sure that there is sufficient free space. If 
there is not, an error will occur.

If you open the time slice (Slice) dialog box on the same 
sample, it will be sliced in the same way as previously. 
These slice locations will also be used if you execute 
“Time Slice” (

☞

3.1–2e), so that you can execute time 

stretch without having to make the settings again.
If you wish to detect the attacks again or to re-do the 
operation, change the “Sensitivity” after you open the 
dialog box.

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Atomos Ninja Blade Quick Start Manual preview
Ninja Blade
Brand: Atomos Pages: 4
Danfoss EKC 201 Manual preview
EKC 201
Brand: Danfoss Pages: 6
Mini SPARE AIR Owner'S Manual preview
SPARE AIR
Brand: Mini Pages: 20
Samsara EM31 Install Manual preview
EM31
Brand: Samsara Pages: 16
Aqua Lung PHODS Technical Manual preview
PHODS
Brand: Aqua Lung Pages: 24
Balluff BML-S1G0-Q71 Series Condensed Manual preview
BML-S1G0-Q71 Series
Brand: Balluff Pages: 20
LOVATO ELECTRIC DMED302 Instruction Manual preview
DMED302
Brand: LOVATO ELECTRIC Pages: 10
e-sylife Gas Module Installation Manual preview
Gas Module
Brand: e-sylife Pages: 2
kruss DSA100 Installation And Operation Manual preview
DSA100
Brand: kruss Pages: 115
SATO KEIRYOKI 1410-00 Instruction Manual preview
1410-00
Brand: SATO KEIRYOKI Pages: 2
Hanna Instruments HI 96762C Instruction Manual preview
HI 96762C
Brand: Hanna Instruments Pages: 28
Westfalia 91 38 20 Original Instructions Manual preview
91 38 20
Brand: Westfalia Pages: 18
XS Instruments 60 VioLab Series Instruction Manual preview
60 VioLab Series
Brand: XS Instruments Pages: 41
Toner OLS1315A User Manual preview
OLS1315A
Brand: Toner Pages: 7
Stabila LAR 160 Operating Instructions Manual preview
LAR 160
Brand: Stabila Pages: 14
IET Labs PRS-370 SERIES Operation Manual preview
PRS-370 SERIES
Brand: IET Labs Pages: 54
Lutz 0212-100 Operating Instructions Manual preview
0212-100
Brand: Lutz Pages: 72
tecnotest STARGAS 898 LIGHT Operating Instructions Manual preview
STARGAS 898 LIGHT
Brand: tecnotest Pages: 146

Brands by name

Popular brands

Load more brands