manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

258

Numerics

00: No Effect ...................45, 156, 159
10’s Hold

Combination..............................32
Program .......................................2

A

ADC OVER! .............................92, 93
After Touch

MIDI Filter

Combination ........................41
Sequencer..............................66

AfterTouch Curve .......................122

Convert Position.....................127

AIFF file .............7, 87, 139, 146, 150,

 151, 247

AIFF format ..................................146
AKAI format ................133, 141, 147
AKAI Program File ....133, 140, 141, 

145, 147

Alternate Modulation ......12, 13, 17,

 20, 23, 50, 211, 214, 233, 234

Amp Level ........................................3
AMS(Alternate Modulation 

Source)
Amp AMS..................................20
Filter AMS .................................15
Filter EG AMS ...........................15
Freq. AMS..................................23
JS X/Bend as AMS .............42, 67
Level Mod. AMS...........12, 17, 21
LFO AMS .......................11, 16, 20
Pan AMS ....................................18
Pitch AMS..................................10
Pitch EG AMS ...........................10
Resonance AMS ........................13
Time Mod. AMS ...........13, 17, 22

Arabic ................................................5
Arpeggiator

Combination........................35, 43
Program .................................4, 24
Sequencer...................................81

Arpeggiator Run

Combination........................35, 43
Sequencer...................................81

Arpeggio Pattern ...................24, 136
Arpeggio Tone Mode..................136
Arpeggio Type .............................136
Assign......................9, 36, 61, 72, 132

Arpeggiator Assign

Combination ........................43
Sequencer..............................82

Foot Pedal Assign...................125
Foot Switch Assign.................125

Attack Level ....................... 12, 16, 20

Amp EG..................................... 20
Filter EG..................................... 16
Pitch EG..................................... 12

Attack Time............... 3, 8, 12, 17, 20, 

133, 216, 234
Amp EG..................................... 20
Filter EG..................................... 17
Pitch EG..................................... 12

AUDIO INPUT ...................... 93, 126
AUDIO OUTPUT (INDIVIDUAL) .

156

[AUDITION] key ....... 9, 87, 89, 107,

 109, 111

Audition Riff.................................... 9
Auto

Auto Loop On........................... 93
Auto Punch In .......................... 56

Auto Arpeggiator........................ 123

B

Bank

Bank Select message ..... 222, 226,

 238

Change all bank references... 124
Combination ............................. 31

Bank select message............ 33

Control change message ....... 124
Drum kit .................................. 134
Dump ....................................... 129
Load ......................................... 142
Preload..................................... 123
Program....................................... 1

Multisample........................... 7

RAM bank ................................. 97
Sampling ................................... 91

Memory bank ...................... 90

Save .......................................... 148
Sequencer

Bank Select message ........... 51
Bank(EX2) MSB, LSB .......... 62
Program bank ...................... 54

Base key ............................ 87, 89, 106
Bend Range

Combination ............................. 37
Sequencer .................................. 63

Bottom Key ................ 39, 64, 65, 147
Bottom Velocity................. 40, 65, 66
Bounce

Bounce Pattern ......................... 70
Bounce Track ............................ 76

BPM

BPM/MIDI Sync function ... 155, 

219

Detune (BPM Adj.)............. 37, 63
Detune BPM Adjust........... 38, 63
Grid .......................................... 107
Pitch BPM Adj. ....................... 117

BUS Select .... 156, 158, 159, 160, 162

AUDIO INPUT....................... 126
Global ...................................... 135
Program ........................ 26, 27, 28
Sampling ................................... 93
Sequencer............................ 57, 84

C

Cat. HOLD (Category Hold)......... 2
Category.......... 2, 3, 8, 27, 29, 32, 33,

 34, 53, 54, 55, 131, 133, 134

Category name ............................ 132
Cautions regarding sample 

data ............................................ 87

Chain ...................................... 28, 161
Change Multisample Type.......... 96
Changing the time signature in the 

middle of a measure................ 50

Chord strummed on a guitar .... 138
Constant Pitch ............................. 117
Control change message.... 123, 124
Convert

Convert Multisample To 

Program ............................... 97

Convert to Song (Convert Cue 

List to Song)......................... 60

Convert Multisample To 

Program .................................... 97

Convert Position ......... 121, 122, 127
Convert to Song 

(Convert Cue List to Song)..... 60

COPY .............................................. 59
Copy

Copy Arpeggiator.. 25, 44, 82, 83
Copy Cue List........................... 60
Copy Drum Kit ...................... 134
Copy From Combi................... 52
Copy From Song ...................... 52
Copy Insert Effect ...... 26, 84, 119
Copy Key Setup ..................... 134
Copy Master Effect ...... 28, 48, 86
Copy Measure .......................... 78
Copy Multisample................... 95
Copy Oscillator .......................... 6
Copy Pattern ............................ 70
Copy Scale .............................. 131
Copy Song ................................ 61
Copy To Track.......................... 71
Copy Track ............................... 76
Sample....................................... 94
Sampling ................................. 116

Copy Pattern.................................. 70
Create ........................................... 116

CREATE .................................. 116
Create Ctrl (Create Control 

Data) ..................................... 78

Create Directory..................... 152
Create New Multisample ....... 88
Create Zone Preference......... 117

Crossfade Loop ........................... 115
Cue List .................................... 49, 58

Index

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Kawai DG30 Setting Manual preview
DG30
Brand: Kawai Pages: 19
Calculated Industries 6425 User Manual preview
6425
Brand: Calculated Industries Pages: 64
Vanguard Instruments II Series Operating Instructions Manual preview
II Series
Brand: Vanguard Instruments Pages: 24
Hameg HM8118 Operator'S Manual preview
HM8118
Brand: Hameg Pages: 44
Hameg HM8118 Manual preview
HM8118
Brand: Hameg Pages: 60
Hameg HM5014-2 Service Manual preview
HM5014-2
Brand: Hameg Pages: 28
HAMAR LASER STEALTH Series General Training Manual preview
STEALTH Series
Brand: HAMAR LASER Pages: 113
MadMan EMS-3 Operating Manual preview
EMS-3
Brand: MadMan Pages: 37
MADDALENA microCLIMA U Installation And Operating Instructions preview
microCLIMA U
Brand: MADDALENA Pages: 5
Yamaha Disklavier E3 Quick Reference Manual preview
Disklavier E3
Brand: Yamaha Pages: 10
Yamaha Disklavier E3 Playing Manual preview
Disklavier E3
Brand: Yamaha Pages: 38
Yamaha Disklavier E3 Update Manual preview
Disklavier E3
Brand: Yamaha Pages: 45
Yamaha Electone Stagea ELS-01C Owner'S Manual preview
Electone Stagea ELS-01C
Brand: Yamaha Pages: 248
ColorLite Rugged 2 User Manual preview
Rugged 2
Brand: ColorLite Pages: 68
Gas Data GFM 436 User Manual preview
GFM 436
Brand: Gas Data Pages: 99
ESP LTD KH-602 Owner'S Manual & Warranty Information preview
LTD KH-602
Brand: ESP Pages: 12
OHAUS MB45 Instruction Manual preview
MB45
Brand: OHAUS Pages: 71
Sonel CMP-400 Operating Manual preview
CMP-400
Brand: Sonel Pages: 26

Brands by name

Popular brands

Load more brands