manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

126

Damper Polarity

[(–) KORG Standard, (+)]

Set this to match the polarity of the damper pedal connected 
to the rear panel DAMPER jack.
If a Korg DS-1H (sold separately) damper pedal is con-
nected, the pedal switch polarity will be (

↓

), so select “(–) 

KORG Standard

” for this setting. If you have connected a 

damper pedal with a positive (

↑

) polarity, select “(+)” for 

this setting. (

↓

 is open-type, 

↑

 is closed-type.) If the polarity 

does not match, operating the damper pedal will not pro-
duce the correct result. If no damper pedal is connected, set 
this to “(–) KORG Standard.”

Foot Switch Polarity

[(–) KORG Standard, (+)]

Set this to match the polarity of the pedal switch connected 
to the rear panel ASSIGNABLE SWITCH jack.
If a Korg PS-1 (sold separately) pedal switch is connected, 
the pedal switch polarity will be (

↓

), so select “(–) KORG 

Standard

” for this setting. If you have connected a pedal 

switch with a positive (

↑

) polarity, select “(+)” for this set-

ting. (

↓

 is open-type, 

↑

 is closed-type.) If the polarity does 

not match, operating the pedal switch will not produce the 
correct result. If no pedal switch is connected, set this to “(–) 
KORG Standard

.”

■

 1.1–3b: UTILITY

☞

“Write Global Setting,” “Load Preload/Demo data,” 
“Change all bank references,” “Half Damper Calibration,” 
“After Touch Calibration” (1.1–1d)

1.1–4: AudioIn 

(Audio In)

This page will be displayed (and will be operable) only if the 
EXB-SMPL is installed.

If the EXB-SMPL option (sold separately) is installed, you 
can use Sampling mode to record an external analog audio 
source while applying the insert effect to it. In other modes, 
the insert effect, master effects, and master EQ can be 
applied to the external analog audio signal, allowing you to 
use the TRITON Le as a 2-in 4-out effect processor, or to use 
external sounds in conjunction with internal sounds.

The settings here are valid for Combination, Program, and 
Sequencer modes, and will determine the input, level, pan, 
bus, and master effect send levels from rear panel AUDIO 
INPUT 1 and 2.

These settings will have no effect in Sampling mode. If 
you move from Sampling mode to Global mode, the 
“Audio Input” settings of Sampling mode will be main-
tained, and it will not be possible to view settings. 
Please move here from a mode in which external audio 
signals can be input (Combination, Program, or 
Sequencer mode). In Sampling mode, the rear panel 
AUDIO INPUT 1 and 2 settings can be made in the 
same way as here, using the parameters in “Input1,” 
“Input2” (SMPL 1.1–3). In Sampling mode, you can 
record while applying insert effect to the external audio 
source that is input from AUDIO INPUT 1 and 2. (The 
master effects and master EQ cannot be used.)

1.1–4a: Input1
1.1–4b: Input2

Level (Input Level)

[0...127]

The analog audio signal from AUDIO INPUT 1 and 2 is con-
verted by an AD converter from an analog signal to a digital 
signal. This parameter sets the signal level immediately after 
the sound has been converted into a digital signal. Normally 
you will set this to 127. If the sound is still distorted even 
after this level is lowered significantly, it is possible that the 
sound is distorting before the AD converter. Adjust the 
[LEVEL] knob or the output level of the external audio 
source.

Pan (Input Pan)

[L000...C064...R127]

Sets the panning of the signal from AUDIO INPUT 1 and 2. 
When inputting a stereo audio signal, you will normally set 
Input 1 to L000 and Input 2 to R127 (or, Input 1 to R127 and 
Input 2 to L000). When inputting a monaural audio signal, 
normally set this to C064.

BUS(IFX/Indiv.) Select (Input BUS Select)

[L/R, IFX, 1, 2, 1/2, Off]

In the same way as for the oscillators of a program, this 
parameter specifies the bus to which the external input of 
AUDIO INPUT 1 and 2 will be sent (

☞

7. Effect Guide, Insert 

Effect “2–4. Audio Input”).

Send1(Input Send1), Send2(Input Send2) [000...127] 

In the same way as for the oscillators of a program, this 
parameter specifies the send levels from the external input 
of AUDIO INPUT 1 and 2 to the master effects. If “BUS 
(IFX/Indiv.) Select” is set so that an insert effect is being 
applied to the external input, the send levels to the master 
effects are set after the signal passes through IFX by “S1 
(Send1(MFX1),” “S2 (Send2(MFX2)” (7.1–2). (

☞

7. Effect 

Guide, Master Effect “2–4. Audio Input.”)

When the “BUS (IFX/Indiv.) Select” setting is other 
than Off and the “Level” value is raised, the external 
input sound will be input to the TRITON Le. If audio 
cables are connected to the rear panel AUDIO INPUT 1 
and 2 jacks at this time, noise will be input (even if there 
is no incoming audio signal) into the TRITON Le, and, 
depending on your settings, in some cases may be out-
put from the AUDIO OUTPUT L/MONO, R, 1, 2 jacks. 
If you are not using an external audio input source, and 
are only playing programs, combinations, or songs etc. 
that use the TRITON Le’s internal sounds, turn “BUS 
(IFX/Indiv.) Select” Off, or set “Level” to 0.
If audio cables are not connected to the rear panel 
AUDIO INPUT 1 and 2 jacks, the input data that passes 
from the AD converter into the TRITON Le will be 
forced to zero, so that no noise will be input.

■

 1.1–3c: UTILITY

☞

“Write Global Setting,” “Load Preload/Demo data,” 
“Change all bank references,” “Half Damper Calibration,” 
“After Touch Calibration” (1.1–1d)

1.1–4a

1.1–4b

1.1–4c

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

TA Q Series Getting Started Manual preview
Q Series
Brand: TA Pages: 58
Magnetic Instrumentation 2130 Instruction Manual preview
2130
Brand: Magnetic Instrumentation Pages: 63
Keithley 199 Quick Reference Manual preview
199
Brand: Keithley Pages: 49
Teac LX Series Instruction Manual preview
LX Series
Brand: Teac Pages: 148
IFM LX Series Operating Instructions Manual preview
LX Series
Brand: IFM Pages: 25
Gallien-Krueger 250ML Operating Instructions preview
250ML
Brand: Gallien-Krueger Pages: 4
Campbell 109B Instruction Manual preview
109B
Brand: Campbell Pages: 16
Unipulse F320 Operation Manual preview
F320
Brand: Unipulse Pages: 129
IDEAL 61-732 Instruction Manual preview
61-732
Brand: IDEAL Pages: 11
IDEAL 61-686 Operating Instructions Manual preview
61-686
Brand: IDEAL Pages: 16
Keller CellaCast PA8 Series Quick Manual preview
CellaCast PA8 Series
Brand: Keller Pages: 12
Pasco Scientific Precision 2.0 Instruction Manual And Experiment Manual preview
Precision 2.0
Brand: Pasco Scientific Pages: 11
X-laser LASERCUBE Owner'S Manual And User'S Manual preview
LASERCUBE
Brand: X-laser Pages: 17
Garmin DESCENT 12 Owner'S Manual preview
DESCENT 12
Brand: Garmin Pages: 22
Velleman DVR8T3 Quick Installation Manual preview
DVR8T3
Brand: Velleman Pages: 107
Dynojet Dynoware RT Installation Manual preview
Dynoware RT
Brand: Dynojet Pages: 88
VP instruments VPLog-i-R User Manual preview
VPLog-i-R
Brand: VP instruments Pages: 15
Osaka OI 22-V User Manual preview
OI 22-V
Brand: Osaka Pages: 3

Brands by name

Popular brands

Load more brands