manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

14

Reso.AMS (Resonance AMS)

[Off, (PEG, FEG, AEG, LFO, KT, EXT)]

Indicates the source that will control the “Resonance (A Res-
onance)” level (

☞

p.212 “AMS List”).

Intensity (AMS Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “Reso. 
AMS (Resonance AMS)” will have on the resonance level 
specified by “Resonance (A Resonance).”
For example, if Velocity has been selected, changes in key-
board velocity will affect the resonance.
With positive (+) values, the resonance will increase as you 
play more strongly, and as you play more softly the reso-
nance will approach the level specified by the “Resonance 
(A Resonance)” setting.
With negative (–) values, the resonance will decrease as you 
play more strongly, and as you play more softly the reso-
nance will approach the level specified by the “Resonance 
(A Resonance)” setting.
The resonance level is determined by adding the “Reso-
nance (A Resonance)” and “Intensity (AMS Intensity)” val-
ues together.

4.1–1c: B (Filter B)

This will be displayed if “Type (Filter1 Type)” (4.1–1a) is 
Low Pass & High Pass

.

This filter cuts the low-frequency range that lies below the 
cutoff frequency.
By cutting the lower overtones, it lightens the tone.

Frequency (B Frequency)

[00…99]

Specifies the cutoff frequency of filter 1B.

■

 4.1–1d: UTILITY

☞

“Write Program” (1.1–1c), “Copy Oscillator,” “Swap 
Oscillator” (2.1–1d)

4.1–2: Mod.1 

(Filter1 Modulation1)

Indicates settings for keyboard tracking which modifies the 
tone by modulating the filter 1 cutoff frequency “Frequency 
(A/B Frequency),” and intensity settings for the filter 1 EG, 
etc.

4.1–2a: Keyboard Track 

These settings specify keyboard tracking for the cutoff fre-
quency of filter 1. The way in which the cutoff frequency is 
affected by the position of the key (on the keyboard) that 
you play can be specified by the Key: “Low” and “High,” 
Ramp: “Low” and “High” parameters.

Key:

Specifies the note numbers at which keyboard tracking will 
begin to be applied, and set the “Int. to A” and “(Int. to) B” 
parameters to specify the depth and direction of the change 
applied to filter 1 A and B.
For the range of notes between “Low (KBDTrk Key Low)” 
and “High (KBDTrk Key High),” the cutoff frequency will 
change according to the key location (pitch).

You can also input a value by playing a note on the key-
board while you hold down the [ENTER] key.

Low (KBDTrk Key Low)

[C–1…G9]

Keyboard tracking will apply to the range below the speci-
fied note number.

High (KBDTrk Key High)

[C–1…G9]

Keyboard tracking will apply to the range above the speci-
fied note number.

Ramp (Ramp Setting):

Specifies the angle of keyboard tracking.

Low (KBDTrk Ramp Low)

[–99…+99]

High (KBDTrk Ramp High)

[–99…+99]

If “Int. to A (KBDTrk Int. to A)” and “Int. to B (KBDTrk Int. 
to B)” are set to +50, “Low (KBDTrk Ramp Low)” is set to
–62

 and “High (KBDTrk Ramp High)” is set to +62, the angle 

of the change in cutoff frequency will correspond to the key 
location (pitch). This means that the oscillation that occurs 
when you increase the “Resonance (A Resonance)” (4.1–1b) 
will correspond to the keyboard location.
If you set “Low (KBDTrk Ramp Low)” to +43 and “High 
(KBDTrk Ramp High)” to –43, the cutoff frequency will not 
be affected by keyboard location. Use this setting when you 
do not want the cutoff frequency to change for each note.

How cutoff frequency is affected by keyboard location and the Ramp 
setting
(“Int. to A,” “Int. to B”=+50)

Int. to A (KBDTrk Int. to A)

[–99...+99]

Specifies the depth and direction of the effect on filter 1A 
produced by keyboard tracking settings “Low (KBDTrk Key 
Low),” “High (KBDTrk Key High),” “Low (KBDTrk Ramp 
Low),” and “High (KBDTrk Ramp High).”
With positive (+) settings, the effect will be in the same 
direction as the keyboard tracking settings.
With negative (–) settings, the effect will be in the opposite 
direction.

The effect of resonance

Low Pass

Level

Low resonance value

High resonance value

Level

Frequency

High Pass

12dB/oct

4.1–2a

4.1–2b

4.1–2d

4.1–2c

Cutoff frequency

Key

Low Ramp=+99

Low Ramp=+43

Low Ramp=0

Low Ramp=–62

Low Ramp=–99

High Ramp=+99

High Ramp=+62

High Ramp=0

High Ramp=–43

High Ramp=–99

Low Key

High Key

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Harley Benton ST Style User Manual preview
ST Style
Brand: Harley Benton Pages: 28
Macherey-Nagel NANOCOLOR Advance Operating Instruction preview
NANOCOLOR Advance
Brand: Macherey-Nagel Pages: 45
Tavool MD50 User Manual preview
MD50
Brand: Tavool Pages: 12
TC Electronic Clarity M User Manual preview
Clarity M
Brand: TC Electronic Pages: 20
Keeler KAT R Instructions For Use Manual preview
KAT R
Brand: Keeler Pages: 68
Macnaught IM012E Instruction Manual preview
IM012E
Brand: Macnaught Pages: 8
JUMO LOGOSCREEN 601 Manual preview
LOGOSCREEN 601
Brand: JUMO Pages: 24
ABQ Industrial Dakota Ultrasonics ZX-2 Instruction Manual preview
Dakota Ultrasonics ZX-2
Brand: ABQ Industrial Pages: 27
ECOTEST STORA-ABG RKS-01 Operating Manual preview
STORA-ABG RKS-01
Brand: ECOTEST Pages: 146
U.S. Solid USS-HMA03 Instruction Manual preview
USS-HMA03
Brand: U.S. Solid Pages: 30
Olympus OMCL-AC240TS-R3 User Manual preview
OMCL-AC240TS-R3
Brand: Olympus Pages: 3
Saluki Technology S3302A Datasheet preview
S3302A
Brand: Saluki Technology Pages: 161
Camlab CW/6230 Instruction Manual preview
CW/6230
Brand: Camlab Pages: 28
Amrutha Technologies AlcoEasy A65 Operating Manual preview
AlcoEasy A65
Brand: Amrutha Technologies Pages: 22
Straightpoint LLP Operating Instructions Manual preview
LLP
Brand: Straightpoint Pages: 24
Tech 21 SansAmp Classic Owner'S Manual preview
SansAmp Classic
Brand: Tech 21 Pages: 5
Magnusson V10523 Manual preview
V10523
Brand: Magnusson Pages: 96
Sontex Superstatic 749 Instructions For Use Manual preview
Superstatic 749
Brand: Sontex Pages: 24

Brands by name

Popular brands

Load more brands