manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

92

Count Down (Count Down REC)

[Off, 4, 8, 3, 6]

When you begin sampling with “Mode (REC Mode)” set to 
Manual, this parameter specifies whether there will be a 
count-down before sampling begins.

Off

: When you press the [START/STOP] key from sampling 

standby mode, sampling will begin immediately.
4

, 8, 3, 6: When you press the [START/STOP] key from sam-

pling standby mode, sampling will begin after a count-
down of the specified length, based on the tempo of “

 

(Tempo).” If you specify 4, the count will be 4-3-2-1-0, and 
sampling will begin on the count of 0.

This will not be displayed if “Mode” is set to Auto.

  (Tempo)

[040...240]

This sets the tempo of the count-down when “Count Down” 
is used.
The tempo specified here will also be used when the LFO or 
delay time of the insert effect is controlled by the BPM/
MIDI SYNC function during sampling (

☞

p.219). This can 

also be set by the REALTIME CONTROLS C-mode 
[TEMPO] knob.

Pre Trigger (Pre Trigger REC)

[000...500ms]

When sampling the sound that occurs before sampling is 
actually triggered, this setting specifies the time length that 
will be “pre-sampled.”
When sampling in auto mode (“Mode (REC Mode)” Auto), 
sampling will begin when the input signal exceeds the spec-
ified threshold level “Threshold.” However depending on 
the “Threshold” settings, the early portion of the attack 
sound may be lost, and in such cases you can use “Pre Trig-
ger.”
Also, when sampling manually (“Mode (REC Mode)” Man-
ual

) and using “Count Down,” you may intend to play your 

instrument etc. at precisely the downbeat but actually be 
slightly ahead of the beat. In such cases, you can use Pre 
Trigger REC to sample without loosing the beginning of the 
note.

If you increase this value, you will always be sampling 
more than you need. Normally you should leave this 
set at 000ms, and set it to a minimal value only when 
necessary.

1.1–2c: Recording Level

Recording Level

[–inf, –72.0... 0.0...+18.0dB]

Adjust the final level of the signal that will be sampled.

This can also be set in the Input/Pref page.

When you press the [REC/WRITE] key you will enter sam-
pling standby mode, and you will be able to adjust the sig-
nal level.
Initially you should set this to 0.0, and make adjustments so 
that the level of the bar is as high as possible without 
exceeding 0 dB. If 0 dB is exceeded, “CLIP!” will be dis-
played. This indicates that the sampling signal level is exces-
sive. Adjust the level so that “CLIP!” does not appear.

In order to sample with the maximum dynamic range, 
use the [LEVEL] knob to adjust the level as high as pos-
sible without making “ADC OVER!” appear. Then set 
“Lvl” (Input/Pref page) to 127, and adjust “Recording 
Level” (Recording page, Input/Pref page) as high as 
possible without making the “CLIP!” indication appear.

In the sampling standby mode after you press the [REC/
WRITE] key, the sound that is output from the AUDIO 
OUTPUT L/MONO, R and from the headphones will be 
adjusted by the “Recording Level,” but when you cancel 
sampling standby or cancel sampling, the sound will be 
output at the 0 dB level. If you have lowered the 
“Recording Level” below 0 dB, please be careful of sud-
den changes in volume.

If the sound is still distorted even if you lower the 
“Recording Level,

” it is possible that distortion is 

occurring in the input stage of the AUDIO INPUT, or 
that distortion is being caused by the settings of the 
internal effect.

Excessive signal levels in the input stage of the AUDIO 
INPUT can be verified in the Recording page, Input/
Pref page. If an indication of “ADC OVER!” appears 
above the “Recording Level” bar display, the distortion 
is due to excessive levels in the input stage of the 
AUDIO INPUT. Adjust the [LEVEL] knob until the 
“ADC OVER!” display no longer appears.
(see diagram below)

If there is still distortion even after [LEVEL] has been 
lowered, it is possible that the distortion is being caused 
by the settings of the internal effect. Lower the Input 1, 
2 “Lvl” (Input/Pref page), or adjust the effect settings. 
(see diagram below)

If you have sampled at a low input level, you can exe-
cute Normalize in Utility “Norm./Level Adj.” (2.1–2e) 
to amplify the level to the maximum possible without 
clipping.

AUDIO INPUT

ADC

Analog to Digital
Converter

[LEVEL]
(MIN...MAX)

"Lvl" (1.1–3a)
[127=0dB]

"Pan" (1.1–3a)

ADC OVER!

L-Mono

R-Mono

Stereo

"Mode" (1.1–2a)

Insert 

Effect

CLIP!

"Recording Level" (1.1–2c)
[–inf ... 0.0dB ... +18.0dB]

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

OfiTE 800 Instruction Manual preview
800
Brand: OfiTE Pages: 24
Larson Davis 820 Technical Reference Manual preview
820
Brand: Larson Davis Pages: 193
Facom 712B Instruction Manual preview
712B
Brand: Facom Pages: 116
Hach PLATINUM Series Manual preview
PLATINUM Series
Brand: Hach Pages: 64
National Instruments 9775 Getting Started Manual preview
9775
Brand: National Instruments Pages: 15
Vaisala MGP261 User Manual preview
MGP261
Brand: Vaisala Pages: 90
Vaisala HMP110 series Manual preview
HMP110 series
Brand: Vaisala Pages: 4
JRC JLN-900 Installation And Instruction Manual preview
JLN-900
Brand: JRC Pages: 308
ETI 825-505 Operating Instructions preview
825-505
Brand: ETI Pages: 2
E+E Elektronik THERMOPORT 20 Manual preview
THERMOPORT 20
Brand: E+E Elektronik Pages: 20
Brooks 5851E Installation And Operation Manual preview
5851E
Brand: Brooks Pages: 64
brena AHB8008T-LY User Manual preview
AHB8008T-LY
Brand: brena Pages: 26
Halcyon Multifunction Compensator Owner'S Manual preview
Multifunction Compensator
Brand: Halcyon Pages: 20
Endress+Hauser Prosonic S FMU90 PROFIBUS DP Operating Instructions Manual preview
Prosonic S FMU90 PROFIBUS DP
Brand: Endress+Hauser Pages: 110
CODEL Energy Tech 401 Installation, Operation And Maintenance Manual preview
Energy Tech 401
Brand: CODEL Pages: 131
Radiation Alert AM-7149 Operation Manual preview
AM-7149
Brand: Radiation Alert Pages: 22
JDS Uniphase 2297/02 Operating Manual preview
2297/02
Brand: JDS Uniphase Pages: 61
HACH LANGE LCK 303 Application Instruction preview
LCK 303
Brand: HACH LANGE Pages: 140

Brands by name

Popular brands

Load more brands