manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

238

Master coarse tuning [F0, 7F, nn, 04, 04, vv, mm, F7]

(Normally only the upper byte mm is used. A value of 8192 
[mm, vv=40, 00] is center, 6656 [mm, vv=34, 00] is –12 semi-
tones, and 9728 [mm, vv=4C, 00] is +12 semitones.)

When this is received, “Key Transpose” (GLOBAL 1.1–1a) 
parameter will be set.

Transmitting sound settings data (Data Dump)

Data for programs, combinations, drum kits, user arpeggio 
patterns, global settings, and sequencer data can be trans-
mitted as MIDI exclusive messages. The operation of send-
ing this system exclusive data to an external device is called 
a “data dump.”

By performing a data dump, you can store the TRITON Le’s 
sounds and settings on an external device, or rewrite the 
sounds and settings of another Future instrument.

There are the following three types of data dump.

• When you use the utility manu command “Dump” 

(GLOBAL 2.1–1c) to dump data, various types of 
internal memory data will be transmitted. If this data is 
received by the TRITON Le, the data will be written 
directly into internal memory, and it will not be 
necessary to perform the Write operation. (

☞

p.129, 130 

“Transmission,” “Reception”)

• If “Exclusive” (GLOBAL 2.1–1b) setting is checked, 

selecting a combination in COMBI 1.1: Play will transmit 
data for one combination. Selecting a program in PROG 
1.1: Play will transmit data for one program.

This data is the edit buffer data for the currently selected 
combination or program. If this data is received by the 
TRITON Le, the data will be written into the edit buffer, 
so if you wish to save it to internal memory, you will 
need to perform the Write operation. The Write operation 
can also be performed by a MIDI exclusive Program 
Write Request or Combination Write Request message, in 
addition to the usual method of using the TRITON Le’s 
switches. (

☞

BG p.41 “Saving data”)

• If “Exclusive” (GLOBAL 2.1–1b) setting is checked, data 

will also be dumped in response to a Dump Request 
message. This data is transmitted and received on the 
global MIDI channel.

Editing sounds etc.

By using various MIDI exclusive data dumps, you can 
rewrite all programs or an individual program. By using 
parameter change messages, you can edit individual param-
eters as follows.

Parameter changes

• In Program mode, all parameters other than the program 

name can be edited. Performance editor parameters are 
included.

• In Combination mode, parameters other than the 

combination name can be edited.

Drum kit parameter change/User arpeggio pattern 
parameter change

• In Global mode, you can edit drum kits and user 

arpeggio patterns.

Since the other global parameters or Sequencer mode data 
cannot be edited, you will use data dumps to transfer this 
data. Data dumping of Sampling mode data is not sup-
ported.

The global MIDI channel is used to transmit and receive this 
data.

First check “Enable Exclusive” (GLOBAL 2.1–1b), so that 
exclusive data can be transmitted and received. When you 
change modes on the TRITON Le, a mode change message 
will transmitted. When you change programs or combina-
tions, the parameters for one program or one combination 
will be transmitted together with the program change. 
When you edit individual parameters, parameter change, 
drum kit parameter change, or user arpeggio pattern param-
eter change messages will be transmitted.

When these messages are received, the same editing opera-
tion will be performed as on the transmitted device.

After MIDI exclusive data has been received and processed, 
a Data Load Completed message will be transmitted. The 
control master device must not transmit the next message 
until this message is received (or until a sufficient interval of 
time has elapsed).

When you change programs or combinations, or use param-
eter changes to edit, the changes will affect the data in the 
edit buffer and will not be stored in internal memory unless 
you Write, so that the changes will be lost if you re-select the 
program or combination. The Write operation can be per-
formed by a MIDI exclusive Program Write Request or Com-
bination Write Request message, in addition to the usual 
method of using this instrument’s switches. (

☞

BG p.41 

“Saving data”)

It is not necessary to write a song, but it will not be backed 
up when the power is turned off. If you wish to keep the 
data, save it on external media before turning off the power. 
(

☞

BG p.45 “Saving on external media”)

 If notes are “stuck”

If for some reason, notes become “stuck” and will not stop 
sounding, you can usually stop the sound by changing the 
mode. If notes played via MIDI are stuck, you can discon-
nect the MIDI cable.

MIDI transmits a message called Active Sensing [FE] at reg-
ular intervals. A device that receives this message will be 
aware that an external MIDI device is transmitting to it. Sub-
sequently, if no MIDI messages are received for a certain 
interval of time, the receiving device will decide that the 
connection has been broken, and will turn off any notes that 
had been sounded via MIDI and reset its controller values.

 Playing the TRITON Le

 

multi-timbrally from 

an external device

The TRITON Le can be connected to an external device and 
played multi-timbrally in the following ways.

• MIDI messages from the external device can play a 

combination (8-part multi-timbral performance). You 
can change the overall settings (programs, levels, and 
effects) by using program change messages to switch 
combinations.

• MIDI messages from the external device can be used to 

play a song (16-part multi-timbral performance). Overall 
settings (programs, levels, effects etc.) can be changed by 
using a Song Select message to switch songs. (Song 
Select messages can be received if “MIDI Clock”: 
GLOBAL 2.1–1a is set to External.)

• MIDI Clock messages from the external device can be 

used to make the TRITON Le playback a song (set 
“MIDI Clock” to External, and run this instrument’s 
sequencer). You can change the overall settings 
(programs, levels, effects) by using song select messages 
to switch songs.

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

Oakton 700 Series Quick Manual preview
700 Series
Brand: Oakton Pages: 4
Yamaha 142 Quick Operation Manual preview
142
Brand: Yamaha Pages: 2
FCI ST100 series Operation Manual preview
ST100 series
Brand: FCI Pages: 44
FCI ST100 series Manual preview
ST100 series
Brand: FCI Pages: 36
FCI ST100 series Configuration Software Manual preview
ST100 series
Brand: FCI Pages: 26
Kawai DP100 Owner'S Manual preview
DP100
Brand: Kawai Pages: 22
Kawai Concert Performer CP3 Quick Start Manual preview
Concert Performer CP3
Brand: Kawai Pages: 40
Kawai CN3 Service Manual preview
CN3
Brand: Kawai Pages: 36
Kawai MP7 Owner'S Manual preview
MP7
Brand: Kawai Pages: 148
Kawai CA18 Owner'S Manual preview
CA18
Brand: Kawai Pages: 30
Kawai Classic Series CS6 Owner'S Manual preview
Classic Series CS6
Brand: Kawai Pages: 96
Katronic KATflow 230 Quick Start Manual preview
KATflow 230
Brand: Katronic Pages: 3
Katronic Technologies FLUXUS ADM 6725 Operating Instruction preview
FLUXUS ADM 6725
Brand: Katronic Technologies Pages: 148
Kawai Novus NV10 Owner'S Manual preview
Novus NV10
Brand: Kawai Pages: 176
Underground Magnetics Mag 3 Operator'S Manual preview
Mag 3
Brand: Underground Magnetics Pages: 48
WAGNER Datamaster Manual preview
Datamaster
Brand: WAGNER Pages: 9
Hammond L series Service Manual preview
L series
Brand: Hammond Pages: 78
Magnescale SR85 Supplement Manual preview
SR85
Brand: Magnescale Pages: 8

Brands by name

Popular brands

Load more brands