manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

62

3.1–1: MIDI..8

 (MIDI T01...08)

3.1–2: MIDI..16

 (MIDI T09...16)

Here you can make MIDI-related settings for each track.

3.1–1(2)a: Status, MIDI Channel, Bank(EX2) MSB/

LSB

Status

[INT, Off, BTH, EXT, EX2]

This sets the status of MIDI and the internal tone generator 
for each track.

INT:

 When the musical data recorded in the track is played 

back, or when you use “Track Select” (1.1–1c) to select a 
track that is set to INT and play the keyboard and operate 
the controllers, the internal tone generator of this instrument 
will sound, and MIDI data will not be transmitted to an 
external device.
Off: 

The program will not sound, nor will MIDI data be 

transmitted.
BTH:

 The operation of both INT and EXT will be per-

formed. When the musical data recorded in the track is 
played back, or when you select a track that is set to BTH 
and play the keyboard and operate the controllers, the inter-
nal tone generator of this instrument will sound, and at the 
same time MIDI data will also be transmitted to an external 
device.
EXT:

 When the musical data recorded in the track is played 

back, or when you select a track that is set to EXT and play 
the keyboard and operate the controllers, MIDI data will be 
transmitted to an external device, but the internal tone gen-
erator of this instrument will not sound.
When you switch songs or reset to the beginning of the 
song, tracks that are set to EXT will transmit program 
change, volume, panpot, portamento, send 1, 2, post IFX 
pan, and post IFX send 1, 2 MIDI messages.
EX2:

 “Bank Select” will be enabled. Instead of the A–g: (d) 

bank numbers that can be selected on this instrument, the 
bank number you specify here will be transmitted. In other 
respects this is the same as EXT.

MIDI data is transmitted and received on the MIDI 
channel that is specified separately for each track by 
“MIDI Channel.”

MIDI Channel

[01…16]

Specifies the MIDI channel that the track will use to transmit 
and receive musical data. The MIDI channel you specify 
here will be the receive channel when “Status” is INT, the 
transmit channel when it is EXT or EX2, and the receive/
transmit channel when it is BTH. Tracks set to INT which 
have the same MIDI channel will sound and be controlled 
identically when they receive MIDI data or data from the 
sequencer tracks.

Bank(EX2) MSB

[000...127]

Bank(EX2) LSB

[000...127]

When “Status” is set to EX2, this sets the bank number that 
will be transmitted. When “Status” is other than EX2, this 
setting has no effect.

3.1–1(2)b: UTILITY

☞

“Memory Status,” “Solo Selected Track,” “Rename Song,” 
“Delete Song,” “Copy From Song,” “Copy From Combi,” 
“Load Template Song,” “Save Template Song,” “FF/REW 
Speed,” “Set Location” (1.1–1d)

3.1–3: OSC..8 

(OSC T01...08)

3.1–4: OSC..16 

(OSC T09...16)

These parameters specify how each track will be sounded.

3.1–3(4)a: Force OSC Mode, OSC Select, Porta-

mento

Force OSC Mode

[PRG, Poly, Mono, LGT]

Indicates the “Voice Assign Mode” (PROG 2.1–1b) of the 
program selected for each track 1–16 (

☞

COMBI 3.1–2a).

OSC Select

[Both, OSC1, OSC2]

Specifies the “Oscillator Mode” (PROG 2.1–1a) of the pro-
gram selected for each track 1–16. If the “Oscillator Mode” is 
Double

, you can use this setting to make only one or the 

other oscillator sound (

☞

COMBI 3.1–2a).

SEQ 3.1: Param1

Recorded data
Keyboard and controller
operations

Received data

Status

Internal tone 
generator

MIDI OUT

Internal tone 
generator

MIDI OUT

INT

●

×

●

—

EXT, EX2

×

●

×

—

BTH

●

●

●

—

3.1–1a

1.1–1c

3.1–1b

3.1–3a

1.1–1c

3.1–3b

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

UEi MM100 Instruction Manual preview
MM100
Brand: UEi Pages: 4
WattNode BACnet Reference Manual preview
BACnet
Brand: WattNode Pages: 57
Kanomax 1550 Instruction Manual preview
1550
Brand: Kanomax Pages: 31
Hach DR300 User Manual preview
DR300
Brand: Hach Pages: 196
Oldham BM25 Operating Manual preview
BM25
Brand: Oldham Pages: 43
Cameron NUFLO Scanner 2000 microEFM Quick Start Manual preview
NUFLO Scanner 2000 microEFM
Brand: Cameron Pages: 8
Macherey-Nagel NANOCOLOR UV/VIS II Manual preview
NANOCOLOR UV/VIS II
Brand: Macherey-Nagel Pages: 99
Keeler KAT R Instructions For Use Manual preview
KAT R
Brand: Keeler Pages: 68
Fly Henry Fly Meter Manual preview
Fly Meter
Brand: Fly Henry Pages: 5
Dakota Digital VHX systems Installation And Operation Manual preview
VHX systems
Brand: Dakota Digital Pages: 34
Value WT26 Series Manual preview
WT26 Series
Brand: Value Pages: 20
B meters HYDROSONIS-UP Operating And Installation Instructions preview
HYDROSONIS-UP
Brand: B meters Pages: 3
BGS technic BGS 8639 Instruction Manual preview
BGS 8639
Brand: BGS technic Pages: 16
Trotec OZ-ONE Manual preview
OZ-ONE
Brand: Trotec Pages: 8
Agilent Technologies LogicWave Installation Manual preview
LogicWave
Brand: Agilent Technologies Pages: 26
Lovibond SensoDirect Con200 Operating Instructions Manual preview
SensoDirect Con200
Brand: Lovibond Pages: 24
Kimo DB300/1 User Manual preview
DB300/1
Brand: Kimo Pages: 80
Casio Celviano AP-650M User Manual preview
Celviano AP-650M
Brand: Casio Pages: 84

Brands by name

Popular brands

Load more brands