manualshive.com logo in svg

Korg TRITON Le, Parameter Manual

Introducing the Korg TRITON Le, a versatile and dynamic synthesizer designed for musicians of all levels. With its user-friendly interface and comprehensive "Easy Start" manual, you'll be able to dive right into creating amazing sounds and melodies. Download your free user manual today from manualshive.com and unleash your musical potential.

Share
Download
background image

111

SMPL

1.1

2.1

3.1

4.1

5.1

5.2

7.1

It is not possible to make settings that would cause “Src 
BPM (Source BPM)” or “New BPM” to exceed the range 
of 40–480.
It is not possible to make settings that would cause 
“Ratio” to exceed the range of 50.00–200.00.

Press the [F5] (“Strch”) key to execute Time Stretch. 
When you execute, the time-stretched samples will auto-
matically be assigned to keys D2 and above, so that you 
can audition them by playing the keyboard or by chang-
ing “Index” and pressing the [AUDITION] key. You can 
also keep trying various settings for “Ratio” and “New 
BPM.”
Index

: Selects the index of the sample that will be 

sounded by the [AUDITION] key. After Time Stretch is 
executed, the time-stretched samples will sound. How-
ever, it will not be possible to select Source (C2).

When you audition the time-stretched samples, the 
sound you hear is the sound of each divided sample as 
it will be played in Sequencer mode. If there is obtru-
sive noise or if the attack is not sound cleanly, return to 
step 

7

 and adjust the “S (Start)” and “E (End)” 

addresses, etc.

0

When you execute Save, use “With” to specify the data 
that will be created simultaneously.

Program

: If this check box is checked, the multisample 

will be converted to a program when you save it. Specify 
the destination program number.

 In the case of a stereo sample, the program pan 

will automatically be set. This allows the stereo position 
in Sampling mode to be reproduced by the program.

Seq.Event

: If this check box is checked, sequence data to 

play the sliced samples will be created when you save. 
Set “Song,” “Track,” and “Meter” to specify the song 
number, track number, and time signature that will be 
created.

Events will be created from measure 1 of the specified 
track.

If you specify a vacant song number for the song, the 
song will be created with the number of measures speci-
fied by the Sequencer mode parameter “Set Length” (a 
parameter in the dialog box that appears when you cre-
ate a new song 

☞

p.51). The default is 64 measures.

If you executed Time Stretch, the Song parameter 
“Tempo” (

☞

p.50, SEQ 1.1–1a) of the created song will be 

the value specified by “New BPM.” If you did not exe-
cute Time Stretch, it will be the value specified by 
“Source BPM.” If a tempo event exists only at the begin-
ning of the master track, the tempo of that event will also 
be set to the value specified for “New BPM” or “Source 
BPM.”

If you save to a song that already contains data and the 
time signature is different, the samples may not sound 
as they did originally. You will need to set the time sig-
nature of the master track to match.

If both “Program” and “Seq.Event” are checked, the song 
parameters “Program Select” (

☞

p.54) and “Track Play 

Loop” (

☞

p.57) will also be set automatically.

For “Track Play Loop,” “Loop On” will be turned on and 
“Play Intro” will be turned off. “Loop Start Meas (Loop 
Start Measure)” will be set to 000, and “Loop End Meas 
(Loop End Measure)” will be calculated according to 
“Meter” and “Src BPM (Source BPM)” and set accord-
ingly.
You can hear the results immediately by selecting and 
playing the song in Sequencer mode.

Normally you will leave both checked.

A

If you wish to save, press the [F8] (“Save”) key. If you 
decide not to save, press the [F7] (“Cancel”) key. When 
you save, the samples and multisample will automati-
cally be saved to vacant samples and multisamples.

 In the case of stereo samples, the samples and 

multisample will be saved in stereo.

B

By repeating steps 

6

–

A

 you can create as many samples 

and multisamples as desired.

C

Press the [F7] (“Exit”) key to exit the Time Slice com-
mand.

Be aware that the created samples and multisample will 
be lost if you exit Time Slice without saving the samples 
or multisample (“Save” in the Save dialog box).

Before executing Time Slice on a long sample, you 
should first divide the sample into measures. In some 
cases, it may not be possible to assign the sample to the 
keyboard or create sequence data.
Time Slices requires vacant samples, multisamples, and 
relative parameters in order to execute. Be sure that 
there is sufficient free area before you execute. If there is 
insufficient free area, an error will occur.

If you open the Time Slice dialog box on the same sam-
ple, it will be sliced in the same way as previously. 
These slice locations will also be used if you execute 
Slice

 in “Time Stretch” (

☞

3.1–2e), so that you can exe-

cute Time Stretch without having to make the settings 
again.
If you wish to detect the attacks again or to re-do the 
operation, change the “Sensitivity” after you open the 
dialog box.

Time Stretch

Time Stretch is a function that modifies the tempo by length-
ening or shortening a sample without changing its pitch. 
This is convenient when you wish to change the tempo of a 
rhythm loop (drums) or a melodic sample (e.g., vocal, 
strings, winds) to match the tempo of another sample or of 
the sequencer. The TRITON Le provides two ways in which 
Time Stretch can be executed. This command also supports 
stereo samples.

Sustaining

This type is suitable for sustained sounds such as vocal or 
instruments. Using it to change the tempo of phrases such as 
guitar or piano will also produce good results.

Slice

This type is suitable for decay-type instruments such as 
drums. Using it to change the tempo of drum or percussion 
loops will produce good results with minimal effect on the 
attack.

There is a way to change the pitch as well when chang-
ing the tempo of a rhythm loop sample (“Pitch BPM 
Adj.” 4.1–2b, “Detune BPM Adjust” COMBI 3.1–3b, 
SEQ 3.1–5(6)b). You can create unique effects by raising 
or lowering the pitch of drums etc.

To use Time Stretch (Sustaining)

1

Use “SMPL” (3.1–1b) to select the sample that you wish 
to time stretch as Sustaining.

2

From the Edit2 page “UTILITY,” choose “Time Stretch” 
to open the following dialog box.

Summary of Contents for TRITON Le














































































































































































































































































Reviews:

No comments

Related manuals for TRITON Le

WattNode BACnet Reference Manual preview
BACnet
Brand: WattNode Pages: 57
Kanomax 1550 Instruction Manual preview
1550
Brand: Kanomax Pages: 31
Hach DR300 User Manual preview
DR300
Brand: Hach Pages: 196
Panasonic PV-V4524S Service Manual preview
PV-V4524S
Brand: Panasonic Pages: 72
Panasonic KW9M Eco-Power Meter Installation Instructions preview
KW9M Eco-Power Meter
Brand: Panasonic Pages: 2
AccuEnergy Acuvim-L Series User Manual preview
Acuvim-L Series
Brand: AccuEnergy Pages: 83
ICS PM-20 Quick Start Manual preview
PM-20
Brand: ICS Pages: 2
CAISSON SL-100 Quick Start Manual preview
SL-100
Brand: CAISSON Pages: 5
R.M. Young 52202 Instruction Sheet preview
52202
Brand: R.M. Young Pages: 2
Parkside PLEM 50 A1 Operating Instructions Manual preview
PLEM 50 A1
Brand: Parkside Pages: 114
Velleman EMDIN02 Manual preview
EMDIN02
Brand: Velleman Pages: 16
Velleman E305EM5 User Manual preview
E305EM5
Brand: Velleman Pages: 4
Velleman DVM1300 Manual preview
DVM1300
Brand: Velleman Pages: 8
velocomp PowerPod Tips And Troubleshooting preview
PowerPod
Brand: velocomp Pages: 4
Watts HF Scientific AccUView LED Ex Quick Start Manual preview
HF Scientific AccUView LED Ex
Brand: Watts Pages: 2
GARANT ST2 Instruction Handbook Manual preview
ST2
Brand: GARANT Pages: 368
Kipp & Zonen PAR lite Instruction Manual preview
PAR lite
Brand: Kipp & Zonen Pages: 32
Omega DPG1001AD Instruction Sheet preview
DPG1001AD
Brand: Omega Pages: 4

Brands by name

Popular brands

Load more brands