Konica Minolta SONIMAGE HS2, Operation Manual

Page: 71 / 308

71
2 .1 Installation
Chapter 2
CAUTION •••••••••••••••••••••••••••••••••••••
• Do not step on or trip over the power supply cord of
the system . Doing so may cause injury or damage
to the system .
• Pay attention to the following points when carrying
this system .
– Before moving a system that is not installed on the
Pole Cart2, be sure to fold down the LCD monitor
and lock the LCD latch . When carrying the system,
hold it by the handle with the transducer in your
hand .
– When moving a system that is installed on the Pole
Cart2, be sure to fold down the LCD monitor and
lock the LCD latch . When carrying the system, hold
it by the handle of the system .
If you move the system by holding any portion of
it other than the handle, it may overbalance and
cause personal injury .
– When the system is equipped with an optional
keyboard, house the keyboard before moving the
system .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• When the system is equipped with a Three-Port
Probe Unit and removed from a Pole Cart2, place
the connector of a transducer on the Pole Cart2 .
•••••••••••••••••••••••••••••••••••••••••••••••••••••