Konica Minolta SONIMAGE HS2, Operation Manual

Page: 235 / 308

235
7 .1 Maintenance Checks Before and After Use
Chapter 7
7 .1 .3 Check after Turning OFF the Power
Check the items below after turning OFF the power .
No . Item
(1)
There should be no deformation, damage, or dirt on the system .
• Clean the system when there is any dirt . Refer to "7 .2 Maintenance Check and Cleaning" and "8 .1 .6 Cleaning and
Disinfection" .
(2) There should be no loosened screws .
(3) There should be no damage to the power supply cord, and/or loosened connectors .
(4)
There should be no dirt and abnormality (projection, cracking, chasm, sharp-edge or peeling) on the appearance of the
transducer, cable, or connector .
• Clean and disinfect the transducer referring to "7 .2 .2 Cleaning Procedures" and "8 .1 .6 Cleaning and Disinfection" .