manualshive.com logo in svg

Konica Minolta SONIMAGE HS2, Operation Manual

Share
Download
Konica Minolta SONIMAGE HS2 Operation Manual Download Page 64

64

1.6   System Configuration and Part Name

SD memory card

Recommended SD memory cards used in this system are listed below . To purchase the SD memory card, contact 

your service representative .

SDHC memory card Class10  PFS0032U series (from TOSHIBA)

PFS0032U-1DCK (32 GB), PFS016U-1DCK (16 GB), PFS008U-1DCK (8 GB)

SDHC memory card Class10 specs SD-WA series (from Panasonic)

SDHC memory card Class4 specs SD-LB series (from Panasonic)

(Example) 

• Speed: Operable with Classes 4 and 10 .

• SD Speed Class is the speed standard regarding continuous writing . Check it on the label side of your card .

 

z

To remove an SD memory card

1  Touch the icon in the status indicator area .

•  A safe removal menu pops up for display .

2 .  Choose the icon for removing the SD memory card 

 you wish to remove .

•  It will be removed safely .

HINT

 •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•  The same applies to the removal of other external devices: touch the icon and operate the system following the infor-

mation displayed on the screen .

 •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Summary of Contents for SONIMAGE HS2





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands