Konica Minolta SONIMAGE HS2, Operation Manual

Page: 70 / 308

70
There are three types of usage of the system .
• Desktop
Put the system on a table .
• Pole Cart2
Attach the system to the Pole Cart2 (optional) .
• Ceiling hanging / Wall mount
Attach the system to an optional VESA Attachment .
CAUTION •••••••••••••••••••••••••••••••••••••
• Pay attention to the following points when installing
this system .
– You can also operate this system, using the touch
panel. Be sure to place the system on a flat surface
under stable conditions . Otherwise, the system
may become unbalanced and it is likely to fall when
you press on the touch panel and may cause an
injury .
– When you have installed this system on the Pole
Cart2 etc ., operation of the touch panel may move
the system to injure you. Lock and fix the casters
so that the system does not move during an
examination .
• Pay attention to the following points when installing
the VESA Attachment .
– The installation and use of the system on a monitor
stand or arm are the responsibility of a user . To
avoid an accident or personal injury, carefully read
the instruction manual for the monitor stand or the
arm and follow safety instructions .
– Install to any VESA-compliant (installation
dimensions: 100 mm x 100 mm) monitor stand and
arm that can withstand loads of 12 kg or more .
– Connect to the AC adapter to use .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When using the system on a desktop, keep the
AC adapter about 10 cm or more away from the
transducer . Otherwise, noise may be present in the
ultrasound image .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
Reference
•••••••••••••••••••••••••••••••••••••
• When installing the system on a Pole Cart2, refer
to "Installation on a Pole Cart2" of the "Operation
Manual: Applications" .
• When installing the VESA Attachment, refer to
"VESA Attachment" of the"Operation Manual: Ap-
plications" .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
2 .1 Installation
2 .1 .1 Moving the System
The system can be moved independently within the
hospital setting . When connected to the Pole Cart2,
the system can be moved on the Pole Cart2 in a study
room or the medical facilities by pushing the Pole
Cart2 while holding the system by the handle .
Before moving
To prevent the system from malfunctioning, press the
power switch, select one of the functions, [Shutdown]
or [Standby], from the dialog to check if the selected
function has been executed .
z
When the Pole Cart2 is not used
1
Close the LCD monitor and unplug the AC
adapter cable from the system’s power
connector .
2
Move the system while holding it by the
handle .
3
After moving the system, plug the AC
adapter cable into the system’s power
connector, open the LCD monitor and turn
ON the power .
z
When the Pole Cart2 is used
1
Close the LCD monitor and unplug the
mains plug from the wall mounted AC
socket outlet .
2
Move the system while holding it by the
handle .
3
After moving the system, plug the mains
plug into a wall mounted AC socket outlet,
open the LCD monitor and turn ON the
power .