Konica Minolta SONIMAGE HS2, Operation Manual

Page: 260 / 308

260
8 .2 Biopsy
8 .2 .5 Biopsy Pop-up Menu
Pressing in the operation button area will display the biopsy pop-up menu and will turn ON the default biopsy
guide display corresponding to the transducer being connected .
Various parameters such as the guideline display and type selection can be changed from the biopsy pop-up menu .
Button Functions
[Biopsy Display]
Enables or disables the biopsy guide display .
• When the biopsy function is started using the [Biopsy] button, this item is also turned ON
automatically, and when it is turned OFF, the biopsy function is ended .
• When the image is frozen with the Biopsy Display inactive, Biopsy Display cannot be made
active . Unfreeze the image before using Biopsy Display .
[Angle Select]
Changes the guide display angle .
• The angle select menu is displayed, which shows the bracket and angle symbols corre-
sponding to the transducer .
• Select the desired bracket and angle symbols, or close the list with the [Cancel] button to
return to the biopsy menu .
[Type Select]
Changes the display combination of the biopsy guide and variance line as follows:
Displays both the guideline and error lines .
Displays only the error lines .
Displays only the guideline .
[Dot Interval]
Changes the intervals of the dot marks of the biopsy guide in relation to the direction of
insertion of the biopsy needle .
• Pitch: 5 mm
⇔
10 mm
[Display cm] Shows / Hides the length of the biopsy needle inserted .
[Close]
Closes only the pop-up menu .
• The guide function does not end .