Konica Minolta SONIMAGE HS2, Operation Manual, Page: 180 / 308

4 .8 Panoramic View
180
List of parameters for B-Mode when starting up panoramic view
The list of parameters for B-mode when starting up panoramic view are as follows .
Item Functions
[Tx Level] TX level settings
[Focus Position]
Focal position setting for B-mode
• The actual focal position depends on the transducer used .
[B Frequency]
Frequency setting for B-mode
• For the parameter range, sequentially select all the frequencies that are available for the trans-
ducer .
[B Gain] Gain setting for B-mode
[Depth]
B image depth settings
• The maximum depth depends on the transducer used (or the exam type) .
• Minimum depth values differ for each transducer.
[B DR] Dynamic range setting for B-mode
[B Map] Map brightness curve setting for B-mode
[P Time Avg .] Persistence setting for B-mode
[Edge Enhance] Edge enhance setting for B-mode
[Simple Adjust] Auto gain adjustment
[S.Adjust Quit] Turns off automatic adjustment of image quality.
[B Color] Color setting for B-mode
[Sound Speed] Sets the velocity used for incoming data .
[B SI-Filter] Speckle noise reduction setting for B images
[THI] THI settings for B-mode
[TD Guide] Sets Show / Hide of the scale marked on the transducer on the screen .
IMPORTANT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• The following settings change automatically when you enter Panoramic View .
– [B Density]: [H]
– [Compound]: [1]
–
[Trapezoid]: [Off]
– [Focus Pattern]: 1
–
[Biopsy], [SNV]: [Off]
– [ECG]: [Off]
• When using Panoramic View, M-mode/PW Doppler-mode/PW-TDI/Color flow/Power Doppler/SCF-mode/ Elastogra -
phy-mode cannot be activated .
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••