Konica Minolta REGIUS SIGMA2, Operation Manual

Page: 59 / 76

5.2 Dealing with plate jams
59
Chapter 5
5 .2 .5 If the Plate’s Mid-section is
the Only Portion Visible From
the Top Door’s Opening
1
Open the left door .
2
Rotate the dial to the left to feed the plate
out of the device until its back end is vis -
ible .
Dial
• If the plate will not eject
If the plate does not come to the roller, you can-
not eject it using the dial. Push the plate to the
roller by hand to eject.
Plate
4
Check the inside of the device, then close
all of its doors .
• Before closing the top door,
make sure that no dust is on the yellow portion
inside of the device . If dust is present, wipe it off
with a dry, soft cloth .
5
Load the plate into the cassette, and per -
form the image erase process .
REFERENCE
• Loading the plate
Refer to “4 .1 .3 Loading the Plate into the Cassette”(p .
40)
• Erasing images
Refer to “3 .2 Image Erase Operation”(p . 30)