Konica Minolta REGIUS SIGMA2, Operation Manual

Page: 60 / 76

5.2 Dealing with plate jams
60
3
When the back end comes out of the
opening, pull out the plate from the open -
ing while rotating the dial to the right .
IMPORTANT
• Make sure the plate does not hit or rub against the top
door .
• Continue to turn the dial until the plate is completely
out of the device .
Dial
4
Hold the lever up, and remove the cas-
sette .
Lever
5
Check the inside of the device, then close
all of its doors .
• Before closing the top door,
make sure that no dust is on the yellow portion
inside of the device . If dust is present, wipe it off
with a dry, soft cloth .
6
Load the plate into the cassette, and per- the plate into the cassette, and per -
form the image erase process .
REFERENCE
• Loading the plate
Refer to “4 .1 .3 Loading the Plate into the Cassette”(p .
40)
• Erasing images
Refer to “3 .2 Image Erase Operation”(p . 30)