Konica Minolta REGIUS SIGMA2, Operation Manual

Page: 52 / 76

52 52
5.2 Dealing with plate jams
Error
Code
Message Appropriate action
27110
USB was disconnected during image transmis-
sion .
Connect USB .
Image transmission will start after connection .
Confirm USB cable connection. Once connection is estab -
lished, image data transmission will resume .
Error
Error
Code
Message Appropriate action
24000
Connection failed .
Check all LAN connections .
Reboot the system if it is not recovered .
If the Image processing controller server has not started
up yet, wait for it to do so .
If the Image processing controller server has started up,
make sure network devices (HUB, cables, etc .) are work-
ing properly between the Image processing controller
client connected to the reader, and the Image processing
controller server . (Also remove and reconnect the cable
connector .)
If the error is not fixed, restart the Image processing con -
troller PC .
25000
Connection with server PC failed .
Check all LAN connections with server .
Reboot the system if it is not recovered .
Make sure network devices (HUB, cables, etc .) are work-
ing properly between the Image processing controller
client connected to the reader, and the Image processing
controller server . (Also remove and reconnect the cable
connector .)
If the error is not fixed, restart the Image processing con -
troller PC .
25200
Data transmission failed by LAN disconnection .
Check all LAN connections with server .
Re-send data after connection recovery
Make sure network devices (HUB, cables, etc .) are work-
ing properly between the Image processing controller
client connected to the reader, and the Image processing
controller server . (Also remove and reconnect the cable
connector .)
By returning to the proper connection status, image data
will be retransmitted . (However, this will only occur when
Image processing controller and reader operations are
uninterrupted . If power is turned OFF, or operations are
halted, image data will not be retransmitted .)
If the error is not fixed, restart the Image processing con -
troller PC . (Image data will be lost in this case .)
25300
Data transmission failed by LAN disconnection .
Check all LAN connections with server .
Reboot the system if it is not recovered .
Make sure network devices (HUB, cables, etc .) are work-
ing properly between the Image processing controller
client connected to the reader, and the Image processing
controller server . (Also remove and reconnect the cable
connector .)
If the error is not fixed, restart the Image processing con -
troller PC .