• If there are any people in the area around the machine, there is danger that they may be hit or caught by
the machine, and this may lead to serious personal injury or death. Before starting travel or swing, be sure
to observe the following.
• Always operate the machine only when seated on the
operator's seat.
• Before starting to move, check again that there is no
people or obstacle in the surrounding area.
• Before moving, sound the horn to warn people in the
surrounding area.
• Check that the travel alarm and other alarms work
properly.
• If there is an area in the rear of the machine which
cannot be seen, position a signalman. Be extremely
careful not to hit any people or object, and drive or
swing slowly.
Always be sure to perform the above precautions even when
the machine is equipped with mirrors and cameras.
PRECAUTIONS WHEN TRAVELLING
Serious personal injury or death can result from tipping over of the travelling machine or its accidental contact.
Always observe the following.
• When driving the machine or performing operations, always keep a safe distance from people, structures,
or other machines to avoid coming into contact with them.
• When travelling on a level ground, keep the work equip-
ment approximately 40 to 50 cm above the ground. If that
height is not maintained between the work equipment and
the ground, the work equipment may get stuck in the
ground and the machine may tip over.
• If the view to the right side is poor, raise the boom to en-
sure better visibility.
• Always turn the auto-deceleration switch OFF (cancel)
when driving the machine on rough ground or steep
slopes. If the machine is operated with the auto-decelera-
tion system ON (activated), the engine speed will rise and
the machine travel speed may suddenly become faster.
• Try to avoid travelling over obstacles. If the machine has to
travel over an obstacle, keep the work equipment close to
the ground and travel at low speed. The machine tips over
easily to the right or left. Do not drive it over obstacles
which make the machine tilt largely to the right or left.
• When driving the machine on the rough ground, drive it at
low speed and do not operate the steering suddenly. There
is a danger that the machine may tip over. The work equip-
ment may hit the ground, and the machine may lose its
balance, or it may damage the machine or structures in the
area.
,&
,&
PRECAUTIONS FOR OPERATION
SAFETY
2-26
Summary of Contents for PC700LC-11
