Komatsu PC700LC-11, Operation & Maintenance Manual

Page: 352 / 442

METHOD FOR SETTING MACHINE AT ANGLE
You can set the machine at an angle by using a slope or blocks. Consider the condition of the machine and
select the safe method.
METHOD FOR USING SLOPE
k k
WARNING
Select a solid and smooth slope.
Always block the tracks from movement, and thrust the work equipment into the ground.
1.
Stop the machine with the work equipment on the downhill side on a slope.
2.
Block the tracks from movement and thrust the work
equipment into the ground.
METHOD FOR USING BLOCK
k k
WARNING
Select a firm flat place.
Put strong blocks under the undercarriage to stabilize the machine and be extremely careful when per-
forming the operation.
1.
Raise the machine off the ground by using the boom and arm.
When doing this, operate the levers slowly.
2.
Place block (5) under the raised track and make sure that
the machine is stable.
3.
Operate the boom slowly and lower the machine.
When doing this, check that the machine is always stable.
MAINTENANCE PROCEDURE MAINTENANCE
4-36