7.13
Section 7
Electrical System and Components
7
Figure 7-18. Solenoid Removed from Starter.
Figure 7-21. Removing Commutator End Plate
Assembly.
6. Remove the frame from the armature and drive
end cap. See Figure 7-22.
Figure 7-19. Removing Plunger.
4. Remove the two thru (larger) bolts. See Figure
7-20.
Figure 7-20. Removing Thru Bolts.
5. Remove the commutator end plate assembly,
containing the brush holder, brushes, springs,
and locking caps. Remove the thrust washer
from inside the commutator end. See Figure 7-21.
Figure 7-22. Starter Frame Removed.
7. Remove the drive lever pivot bushing and
backing plate from the end cap. See Figure 7-23.
Figure 7-23. Removing Backing Plate and Pivot
Bushing.
