Kodak DryView 8150, User Manual

Page: 116 / 178

3-12 7F3319 October 4, 2004
Troubleshooting
Removing Film Jams from Area 3
Area 3 includes the exposure platen. Jams in this area occur as film is
entering the platen before exposure, or as film is leaving the platen after
exposure. In rare cases, film may stall in the transport area above the
platen.
Jam Area 3
1. Open the front door.
NOTE: When film jams in this area, the cartridge may not close. If it does
not close, the front door will not unlock normally. You may have to
open the door manually (see
“Opening the Front Door Manually”
on page 2-49 ). When the front door opens, the top sheets of film
in the cartridge will be exposed. Before opening the door, make
the room as dark as possible to minimize exposure.
2. If the film cartridge is open, turn the rollback knob counterclockwise
to manually close the cartridge lid.
3. Clear the jammed film, if it is accessible.
4. If the film is not accessible:
a. Open the platen door by sliding the door latch to the left and pulling
out the platen door.
H200_0007da
Platen Door
Latch
Plastic Thumb
Tab 1
Plastic Thumb
Tab 2
Vertical
Transport
Platen Feed
Rollers
Area 3
Exposure
Platen