Kodak DryView 8150, User Manual

Page: 79 / 178

Operation and Maintenance
October 4, 2004 7F3319 2-45
When you enter the Customer First passcode and press OK , the PM date is
entered and the "Prints to PM" counter is reset. A confirmation screen
notifies you that the operation is complete.
Image Resizing
If the image sent from the modality is too large for the size of film in the
Imager, the Imager can resize the image to fit on the film by either of two
methods:
• Minify - To reduce the image to fit on the selected film size.
• Crop - To remove the edges of the image to allow it to fit on the
selected page size.
The resizing method is selected separately for each connected modality
when the Imager is setup. Refer to
“Selecting the Type of Image Resizing”
on page 4-14 .
Resizing is required when:
•
An image is too large to fit on the film currently loaded in the
Imager.
•
The modality sends an image with a requested image size
that the Imager cannot print.
When the Imager resizes an image, it prints an icon on the film to notify that
the image has been resized.
Refer to the following table for more information on the resizing methods.