Film Technical Information
October 4, 2004
7F3319
7-3
Recycling Film
According to the Environmental Protection Agency (EPA) standards,
DryView
Laser Imaging Film is not considered hazardous and requires no
special disposal procedures. However, the film does contain silver and
polyester that may be recovered by using one of several recycling processes.
Call your local Kodak sales representative or go to the Kodak web site
www.kodak.com/go/KES
Refer to Publication J700 and see “End of Life Management' section.
Storing and Handling
Undeveloped Film
To achieve consistent results up to the expiration date indicated on the film
package,
DryView
Laser Imaging Film must be stored in a cool, dry place
(41° F/5° C to 77° F/25° C) and protected from radiation and chemistry
fumes.
The film can withstand short-term temperature spikes (up to 95° F/35° C)
for several hours during transit without any significant effect on film quality
or performance. Transit temperatures above 95° F/35° C will gradually
diminish shelf life. If the AIQC encounters film that has been damaged by
improper handling, the AIQC will automatically alert system operators.
DryView
Laser Imaging Film - US Environmental Regulations Comparison
Wet Silver Halide
DryView
Developer
Fixer
Wash
Film
Film
Product Regulations
OSHA MSDS
Required
Required
Not required
Not required
Provided
DOT
Hazardous
Hazardous
No limits
No limits
No limits
Use permits
Local
Local
None
None
None
Disposal* Regulations
EPA
Hazardous
Hazardous
No
No
No
DOT
Hazardous
Hazardous
No
No
No
Note: There is no SUPERFUND liability with
DryView
Laser Imaging Film.
* State and local laws vary. Consult appropriate regulations or authorities prior to disposal.
Summary of Contents for DryView 8150
