Kodak DryView 8150, User Manual

Page: 36 / 178

2-2 7F3319 October 4, 2004
Operation and Maintenance
Turning Imager Power ON and OFF
Power ON
The power switch is located on the back of the Laser Imager. To turn ON the
Imager, set the power switch to the "
|
" position. The Imager performs a
power-up self test that takes about five minutes. After some initial boot-up
screens, the Local Panel
Home screen appears.
Local Panel Home Screen
After the power-up test, the Imager begins a warm-up period that lasts up to
25 minutes. The warm-up period varies depending on how long the Imager
has been turned OFF. During warm-up the Imager can receive and store
images but cannot print films. When the Imager reaches operating
temperature, it starts printing any images that have accumulated during the
warm-up period.
During warm-up you can use the Local Panel to check the contents of the
film cartridge and to open the front door to load a new film cartridge, if
necessary.
Power OFF
Turn the Imager OFF if you do not expect to use it for an extended period of
time or to conserve electrical power.
1. Touch the
Power Off
button on the Home screen.
Power Off
Button
DVB
14x17