Kodak DryView 8150, User Manual

Page: 65 / 178

Operation and Maintenance
October 4, 2004 7F3319 2-31
Setup Imager Screen This screen is the entry point for all of the Imager configuration functions.
These functions are used primarily for installation of the Imager, not for
normal operation. Most of these functions require the Service passcode. A
few of the Local Panel setup functions are accessible with a Key Operator
passcode.
To display this screen:
Menu > Setup Imager
1 Network setup . Select to display the Edit network
configuration screen. (See page 2-32 .)
2 Date and Time . Select to display the Date Time screen. (See
page 2-33 .)
3 Modality (SCU) config . Select to display the Select Modality
screen. This is the entry point for setting parameters related to each
modality that will print to the Imager. (See
page 2-34 .)
4 Local Panel . Select to display the Setup Local Pane l screen.
(See page 2-35 .)
5 Edit service telephone number . Select to display for changing
the service telephone number (See page 2-36 .)
6 Backup configuration . Select to perform a configuration backup
operation. (See “Backing up the Configuration” on page 4-22
7 Restore configuration . Select to restore the Imager
configuration parameters from a prerecorded backup file. (See
“Restore Configuration” on page 2-37 .)
1
3
2
4
5
6
7