Kodak DryView 8150, User Manual

Page: 107 / 178

Troubleshooting
October 4, 2004 7F3319 3-3
NOTE: If you close an Error Message screen without correcting the
current error, you can recall the Error Message from the
Current Errors screen. (See “Current Errors Screen” on
page 3-4 .)
Operator Action
When an error message is displayed:
1. Silence the alarm by touching anywhere on the Error Message
screen.
2. Perform the corrective action recommended on the screen. If this
does not clear the error, call for service. (See “Calling for Support” on
page 3-17 .)
Note the error code and error message before you call for service.
The error message may direct you to perform one of the following actions:
• Restart the Imager.
1. Go to the Home screen.
2. Press the Power Off button.
3. Wait for the Local Panel to go blank.
4. Turn off the power switch on the back of the Imager and then turn it
back on.
• Open the front door manually. See “Opening the Front Door Manually”
on page 2-49 .
• Close the film cartridge. See “Manually Closing the Film Cartridge” on
page 3-9 .