Stratos Multi E461N
61
Usage: DO 1 / DO 2
If PROFINET communication is enabled, DO 1 can be assigned to relay contact K1 (REL 1), DO 2 to relay
contact K2 (REL 2).
01.
Inputs/Outputs
Relay Contacts
.
02.
Select the desired contact with the
up/down arrow keys
and
enter
.
03.
Usage
: DO 1 / DO 2
04.
Set the contact parameters.
6.6.3 Control Inputs
Input OK1
:
off, parameter set selection, flow, function check total, or function check channel
• The function of optocoupler input OK1 is defined in the
System Control
:
Parameter Setting
System Control
Function Control
The switching level for the control signal must be specified:
Parameter Setting
Inputs/Outputs
Control Inputs
Inputs OK…
Input Level
:
Active 10 ... 30 V or active < 2 V
