Kiramek 1370S, Owner'S Manual, Page: 16 / 48

Úåå+)2!-%+å).#
SYSTEM “ARMED” FEATURES
This feature informs you if the siren went off in your absence
and you were too far away for your 2-way pager to be up-
dated about the alert. The Status LED flashes rapidly while the
siren is going off. The Status LED will continue to flash rapidly until you
disarm and turn on the Ignition (or until you disarm and then arm again).
When the ignition or a sensor is triggered 10 times , the secu-
rity system will automatically bypass that specific sector until
you disarm and arm the system again. If a door is left open, it
will be bypassed after the siren goes off 5 times. This feature is
useful to limit noise pollution caused by multiple siren triggers in a short
period of time. Parking near construction sites or having animals jump on
the vehicle can cause such shock sensor triggers to occur, especially if the
sensitivity is set to maximum.
3"3å3ECTORå"YPASSå3YSTEM
$//2å42)''%2
The siren will blast for 30 seconds whenever a door is opened while the
system is armed. Vehicle hazard lights will flash if so installed, and your
pager will emit a siren tone and update icons as shown in Fig-7 below.
0/7%250å!2-%$
If the vehicle’s power is cut and then restored, the 1370 will always power-
up in the Armed state for greater security.
FIG-7: Pager LCD Icon Change Upon Door Trigger
$//2
)#/.
&,!3(%3
42)''%2å-%-/29