Kiramek 1370S, Owner'S Manual, Page: 15 / 48

Úåå+)2!-%+å).#
SYSTEM “ARMED” FEATURES
'7!å'ROUNDå7HENå!RMED
The 1370 feeds a (–) 300mA Ground output while the system is armed. Op-
tional components can be added to this control line, such as LED scanners
or a starter immobilizer relay. When the system is disarmed, power to this
output is removed and all attached devices shutdown.
34!'%å3%.3/2å42)''%2
STå3TAGEåh7ARNINGå#HIRPSv åå
When the shock sensor detects
a light impact, the siren will chirp 5 times, the pager will beep
and update icons as shown in Fig-6 below. Any optional sen-
sors attached to the 1st Stage sensor input can also trigger the 5 warning
chirps. No chirps will be produced in Sensor Bypass Mode or Silent Mode.
NDå3TAGEåh&ULLå3IRENv åå
When the included shock sensor detects hard
impact to the vehicle body, the siren will go off for 30 seconds (or
until stopped by a button press on your pager remote), and the
pager will emit a siren tone and update icons as shown in Fig-6
below. Note that any optional sensors attached to the shock sen-
sor’s 2nd Stage input can also trigger the full siren blast sequence. The
siren will not be triggered while in Sensor Bypass Mode or Silent Mode.
The LED flashes slowly “once per second” while Armed, acting as a visual
theft deterrent. The LED turns off when the system is disarmed.
34!453å,%$
FIG-6: Pager LCD Icon Change Upon Shock Detection
3(/#+
)#/.
&,!3(%3
Your vehicle’s starter can be automatically immobilized whenever the 1370
is Armed by the addition of an optional 896H-1B relay.
34!24%2å+),,å)--/"),):%2
/04)/.!,å0!24å.%%$%$