Kiramek 1370S, Owner'S Manual, Page: 12 / 48

Úåå+)2!-%+å).#
System Operation
!54/!2-
This method of arming is disabled by default — see page 16
for programming details . This feature automatically arms your system
when you do the following: (1) Turn Ignition ON, (2) Turn Ignition OFF,
(3) Open a Door and then (4) Close the Door. Twenty seconds later, you
will hear 1 chirp and 1 pager beep and see 1 light flash. Five seconds later,
the Status LED will start flashing, and all zones will be secured (i.e., the
system will be Armed). NOTE : Doors will not be locked.
!54/2%!2-
This method of arming is disabled by default — see page 16
for details . This feature automatically arms your system 60 seconds after
it is disarmed. (If a door is opened during the sixty seconds, the 1370 will
not automatically rearm.) Fig-1 on page 7 shows the pager LCD display
for Auto-Rearm.
NOTE: Doors will be locked , unlike Auto Arm.
ååå./4%
If you open a door before hearing the Arm chirp, the system will
wait until you close the door. After the door closes, the siren will chirp, the 20
second delay-to-Arm timer will reset and start again.
ååå./4%
During the 20 second delay of Auto Arm or the 60 second delay
of Auto Rearm, the siren cannot be triggered because the system is not yet
armed.
FIG-3: Pager LCD Icon Change After Auto-Arming