Kiramek 1370S, Owner'S Manual, Page: 14 / 48

6)3)/.å3å/7.%23å'5)$%
å./4%
For the first few seconds after the pager siren tone (or vibra -
tion) begins, you may not be able to disarm with 2 presses. If you wait 3
seconds or so, 2 presses will always work (you can stop the siren with one
press, and disarm with the second). But during the first few seconds, it
may take multiple presses before you can stop the siren and disarm.
()'(å3%#52)49å$)3!2-åCONTINUED
Your first press stops the trigger (kills the siren, or kills hazard light flash
if in Silent Mode). Your second press disarms the system. (“2 presses” are
required to disarm whenever there is a system trigger, such as the siren go-
ing off.)
0ANICå-ODE
Panic Mode allows you to trigger the full 30 second
siren blast from your remote, whether the system
is armed or disarmed. Press Button-I or Button-II or
Button-III for 3 seconds. When you release, the pager
icons will update as shown in Fig-5 below, and the
pager will emit a siren tone (or vibrate). Vehicle hazard lights will flash,
the Status LED will flash quickly, and the siren will go off for 30 seconds.
To stop Panic Mode and silence the siren, simply press Button I, II or III
for a short duration (1 sec. or less) and release. Note that you must wait ap-
proximately 4 seconds after you initiate Panic Mode before you press Button
I, II or III, otherwise your button press will be ignored and the siren will keep
sounding.
FIG-5: Pager LCD Icon Display During Panic Mode
0!.)#
System Operation
I II III