Kiramek 1370S, Owner'S Manual, Page: 10 / 48

6)3)/.å3å/7.%23å'5)$%
System Operation
!2-).'
./2-!,å-%4(/$åå
This method is the typical way to arm the 1370S,
with the shock sensor enabled. Ensure that all
doors are closed and then press Button-I on the Pager
remote. After you press Button-I, the doors will lock
and hazard lights will flash once (if so installed). The
siren will chirp 1 time, the Pager remote will beep once and update (see
Fig-1 below), and Status LED will light solid for 5 seconds. (The siren
can’t be triggered while the LED is lit solid — See “Error Chirp” on the
next page.)
å
3),%.4å-/$%å-%4(/$åå
This method of arming will prevent the
siren from making any sound (no con-
firmation chirps, no warning chirps, no
siren blast, etc.). Press Pager Button II
then release. The doors will lock and hazard lights
will flash once (if so installed). The Pager will play a melody and update
(see Fig-2 below), and Status LED will light solid for 5 seconds. (The siren
can’t be triggered while the LED is lit solid — See “Error Chirp.” )
I
II
FIG-2: Pager LCD Icon Change After “Silent Mode” Arming
FIG-1: Pager LCD Icon Change After Arming